Is the Arris CM8200 a modem and router?

CM8200 | Touchstone® CM8200 Cable Modem The Touchstone CM8200 is a DOCSIS 3.1 cable modem supporting 2×192 MHz OFDM in the downstream and 2x96MHz OFDMA in the upstream along with 32×8 channel bonding for up to 2.5 Gbps of broadband data. It supports 2 Gigabit Ethernet ports for enhanced data services to MSO customers.

What does the Arris CM8200 do?

The ARRIS Touchstone® CM8200 DOCSIS® 3.1 Cable Modem provides significantly higher downstream (send) and upstream (receive) Internet connection speeds over the broadband connection on your home or small business network. You use the CM8200 to directly connect a computer to your LAN through an Ethernet connection.

How do I reset my Arris box NBN?

It is recessed to prevent accidental resets. To reboot the modem, press and hold the indented Reset button for three to four seconds. To restore factory defaults, press and hold the indented Reset button for more than 10 seconds or until the front panel LED flashes.

Is Arris cm8200 the same as SB8200?

The Arris CM8200A is identical to the much more expensive retail Arris SB8200, which is certified by Comcast, Cox, TWC, and other cable providers for gigabit service. It can be used in place of its retail sibling with Comcast Xfinity and other services to avoid paying a monthly fee to rent a gateway from them.

What lights should be on my nbn box?

The lights on the NBN box show you the status of your internet connection. If the 4 lights of the black box are not all solid green, then you may be suffering an outage. These lights show, in order, Power, Downstream, Upstream and Online.

What do the lights on my Arris modem mean?

A solid light indicates the modem is powered on. Receive. Solid Green indicates connection from the computer to the Internet established on one channel. Solid Blue indicates operating on more than one channel. Send.

Is the Arris SB8200 discontinued?

This Arris cable modem is DOCSIS 3.1 certified, so you are ready for the future internet delivery standard. Editor’s Note: This product has been removed from our side-by-side comparison because it has been discontinued.

How do I connect my Arris to WiFi?

Arris Router Login and Basic Setup

1. STEP 1: Connect to your network.
2. STEP 2: Go to 192.168. 0.1 using your web browser.
3. STEP 3: Enter the default Arris router login details.
4. Change the default Arris router password.
5. Change the Arris router SSID and wireless password.

What do the lights on nbn router mean?

How many lights should be on my nbn modem?

four lights
The four lights on the top of the nbn™ connection box can tell you a lot about your connection.