What is a mid side source?

What is a mid side source?

Mid-Side is a coincident technique, meaning that both mics are placed as closely as possible to each other and the stereo image is created by differences in loudness rather than time delays, on which other stereo miking methods rely. Mid-Side uses a mid mic, which usually has a cardioid pattern, but can also be omni.

Is mid side coincident?

Mid-Side Is A Coincident Pair Secondly, mid side is considered a coincident pair which means that both microphones occupy the same point in space. This ensures that the signals from each microphone will be time-aligned. That means a mid-side recording is 100% mono compatible!

What is mid side matrix?

Midside Matrix Features Changing the stereo width in Midside Matrix is as simple as boosting or cutting the side signal. If you want to make a stereo source wider then try a +6dB sides boost.

What does MS mean on surround sound?

mid-side
MS (mid-side) stereo is a popular stereo microphone technique because of its good spatial imaging, mono compatibility, surround-sound compatibility, and ability to adjust the stereo field in post production.

What is mid side input?

Mid/side processing takes a left/right stereo signal and breaks it up into two separate layers: Mid and Side. Mid/side processing is a highly effective way of making adjustments to the spacialization of a mix or master to make your mix sound full and wide.

Is Mid Side mono compatible?

Another great benefit of M/S miking is that it provides true mono compatibility. Since the two Side channels cancel each other out when you switch the mix to mono, only the center Mid channel remains, giving you a perfect monaural signal.

What is ORTF mic placement?

In an ORTF pair, it’s the backside of the microphones that are near touching, rather than the front-side. The capsules are spaced about 17cm, or just over 6.5 inches, apart. The angle is slightly wider than that of XY, at 110 degrees.

Is Mid Side stereo?

What Is Mid/Side Processing? Unlike traditional mono or stereo processing, which affects the entire signal, mid/side processing allows you to treat the center and sides of a stereo channel independently. By isolating these signals, you can shape the balance of your stereo image, giving you more control over your mix.

What is the purpose of mid side EQ?

Mid/side EQ allows you to isolate different frequency ranges at the center or sides of your mix. Mid/side EQ can be a powerful tool for removing muddiness by focusing the low-end in the center of the mix, freeing up space on the sides.

Is Mid Side same as mono stereo?

Unlike traditional mono or stereo processing, which affects the entire signal, mid/side processing allows you to treat the center and sides of a stereo channel independently. By isolating these signals, you can shape the balance of your stereo image, giving you more control over your mix.

What does too much midrange sound like?

Too much midrange energy in your mix can make it sound too hard, too boxy, too loud or too edgy. Too little can make it sound dull, scooped or soft. Getting the mids right is critical to your mix, and midrange issues cannot always be fixed at the mastering stage.