Does flue need to be open for pilot light?

Does flue need to be open for pilot light?

If you can control the pilot light, you need to open the damper to the flue only when the fireplace is in use. That way you can reduce the inflow of cold air.

Does flue need to be open for gas fireplace?

Our research shows that the flue on a gas fireplace should remain open during use or when the pilot light is lit. If the flue is closed in either instance, you risk a greater chance of carbon monoxide poisoning or a spark induced structure fire due to a buildup of toxins emitted by propane or natural gas burners.

How do you light a pilot light on a gas fireplace insert?

Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.

Should you leave the flue open?

The smoke from burning wood contains carbon monoxide, so in order to prevent this toxic byproduct from entering your home, it is important to leave the flue open overnight. This enables a draft to carry the compound out into the atmosphere, instead of sinking down the chimney and saturating the room.

What happens if flue is closed?

Close it when it’s not it use. Operating the fireplace with the damper partially closed will not generate more heat. Instead, blocking the passage through the flue will result in smoke entering the home. The damper should be kept open until all embers are finished burning to prevent smoke from escaping into the home.

Should I turn off the pilot light on my gas fireplace in the summer?

Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.

Can a pilot light cause carbon monoxide?

A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.

How do you light the pilot on a vent free fireplace?

Lighting your pilot

  1. Make sure your main gas supply is ON.
  2. From OFF position, turn gas control knob (reads OFF, ON & PILOT) counterclockwise to PILOT position.
  3. Push in knob (this releases the gas to the pilot area only).
  4. With control knob in, push the piezo ignitor in continuously until pilot ignites (every 3-5 seconds).

Does a pilot light use much gas?

Just how much gas does a pilot light consume? Most pilot lights will consume about 600 BTU’s of gas/hour. With 24 hours in a day, that’s roughly 14,400/BTU’s each day. Figuring 30 days, a pilot light will use approximately 432,000 BTU each month.

Should the glass on a gas fireplace be hot?

Make sure family members and guests are aware that the glass and surrounding surfaces on a gas fireplace, stove or insert can be very hot. Wait for the appliance and glass to cool down before allowing anyone to get near it… cool down can take a long time – an hour or more.

Can a pilot light cause an explosion?

If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.