How do you calculate N mm2 to PSI?
How do you calculate N mm2 to PSI?
The calculation for converting newtons per square millimetre (N/mm²) to pounds force per square inch units is as follows:
- 1 psi = 6894.76 pascals (Pa)
- 1 N/mm² = 1,000,000 pascals (Pa)
- psi value x 6894.76 Pa = N/mm² value x 1,000,000 Pa.
- psi value = N/mm² value x 145.038.
How do you convert kg mm2 to PSI?
kgf/mm2↔psi 1 kgf/mm2 = 1421.941176 psi.
How do you convert N mm to MPa?
Please provide values below to convert newton/square millimeter to megapascal [MPa], or vice versa….Newton/square Millimeter to Megapascal Conversion Table.
| Newton/square Millimeter | Megapascal [MPa] |
|---|---|
| 100 newton/square millimeter | 100 MPa |
| 1000 newton/square millimeter | 1000 MPa |
How many psi are in a NM?
Psi to Newton/square Meter Conversion Table
| Psi [psi] | Newton/square Meter |
|---|---|
| 1 psi | 6894.7572931783 newton/square meter |
| 2 psi | 13789.514586357 newton/square meter |
| 3 psi | 20684.271879535 newton/square meter |
| 5 psi | 34473.786465891 newton/square meter |
How do you calculate tensile strength in psi?
Divide the loading force stretching the material by the side area to obtain the pressure applied in psi. Assume a load of 70 pounds. Completing the example yields 70 pounds divided by 8 square inches, which equals 8.75 psi.
What is a PSI value?
Psi-values are a measure of the heat loss of a junction between two fabric elements, eg floor and external wall. These junctions are called non-repeating thermal bridges.
How many PSI are in a kg m2?
Pound force per square inch to Kilogram force per square meter table
| Pound force per square inch | Kilogram force per square meter |
|---|---|
| 1 psi | 703.07 kg/m2 |
| 2 psi | 1406.14 kg/m2 |
| 3 psi | 2109.21 kg/m2 |
| 4 psi | 2812.28 kg/m2 |
What is the formula for PSI?
Use the formula pressure P = 0.43h where h is the water column in feet. We use the constant 0.43 (lb/in2)/ft because this is the amount of pressure 1 foot of water places on a surface below it regardless of the volume of water. meaning 860 psi of force is being exerted on the submarine.
How do you convert torque to PSI?
PSI is a unit of pressure and cannot be converted to Nm (a torque), but it could be converted to N/m2 which is a pressure. 1 pound per square inch = 1/225 * (39.4)2 = 6.9 N/m2. You can convert just about anything to anything else at this site.