How do I backup my SAN switch settings?

How do I backup my SAN switch settings?

Answer

  1. switch:admin> configupload.
  2. Protocol (scp, ftp, sftp, local) [ftp]:local.
  3. File Name [config.txt]: config.txt.
  4. switch:admin> configlist -local.

How do you save a running config on a Dell switch?

Configuration Commands These commands modify the running configuration only and are not saved when the switch is rebooted. To store the running configuration in nonvolatile storage, use the copy running-config startup-config command.

How do I upload a configuration file to a Dell switch?

To upload a file from the switch to a remote system:

  1. Open the File Upload page.
  2. Select the type of file to download to the remote server, in this case configuration.
  3. Select the transfer mode, in this case HTTP or HTTPS.
  4. To upload by using HTTP, click Apply.

How do I backup my Brocade SAN switch configuration?

Backing up a Brocade switch

  1. Establish a putty session to the switch and login as normal.
  2. Enter the command configupload.
  3. At the protocol selection prompt choose the protocol appropriate for you FTP server.
  4. At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.

How do I save running config on Brocade switch?

The configuration file contains all zoning information and configuration settings of fabric.

  1. To take backup of configuration file first login into Switch by using admin account.
  2. Give configupload command.
  3. It will ask you host details in which server you want to save the configuration file.

Which command is used to get you to configuration mode Dell?

Options on How to Configure Switchport Mode Trunk

Command Parameters
Dell(config-if-Gi1/0/1)# end Leave interface configuration mode and go back to Privilege EXEC mode
Dell# show interfaces switchport gi 1/0/1 Display information on the port to verify the switchport mode configuration.

How do I copy a configuration switch?

There are multiple ways you can do it: Telnet the first switch, copy the configuration on a simple text file using the show run command and paste it in the text file. Then connect to the new switch using a serial connection, go to the global configuration mode and paste the configuration to it.

How do I backup my configuration?

Certification authority backup through management console

  1. From the Start menu, point to Administrative Tools and click Certification Authority.
  2. In the console tree, right-click CA Name, point to All Tasks and click Backup CA.
  3. On the Welcome to the Certification Authority Backup Wizard page, click Next.

How do I backup configuration files?

In the >Backup Configuration dialog box, enter the complete path to a local folder where the files should be copied. Provide a path for each DataCore Server in the group. Entries are not case-sensitive and can include spaces such as c:\backup config. Click Backup.

How do I get Supportsave Brocade command line?

Resolution

  1. Log in to the switches using your user account on telnet or SSH.
  2. At the command prompt, type the CLI command supportsave for interactive usage.
  3. Answer the prompts that follow: Give the IP address of your FTP server. Provide the user name/password for your FTP server. Select a protocol (i.e.FTP)

Is write the same as copy running config startup config?

They essentially achieve the same things by saving the running configuration to the memory so that after a reload it retains the same configuration. Write memory is the “ancient” way, and copy running-config startup-config is the “newer way”.

How do I copy a configuration from one switch to another?

Telnet the first switch, copy the configuration on a simple text file using the show run command and paste it in the text file. Then connect to the new switch using a serial connection, go to the global configuration mode and paste the configuration to it. Alternatively you can use a TFTP server.

How do I find my Dell switch model number?

The service tag of the switch modules is in the left part on the front side of the switch. The pull out tag will contain the information of the service tag/serial number.

What file does boots switch use?

The startup-config file is stored in flash memory and contains the configuration that the switch loads when booting. During a switch boot, running-config is replaced by startup-config. Changes to running-config that are not copied to startup-config are lost when the system reboots.