How do you reset an infrared comfort zone heater?

To reset the heater, simply turn power off and unplug the heater for 10 minutes until it cools down and then you may plug the heater in and restart.

Why does my comfort zone space heater keep shutting off?

A dirty or unclean air filter can also cause your space heater to shut off repeatedly without warning. An air filter that has been clogged with dust or debris will off exude a rather foul or unpleasant smell. The odour alone is the first tell-tale sign that it is time to clean out your air filter.

Is there a reset button on Comfort Zone heater?

What are the modes on a comfort zone heater?

Press the MODE button to toggle between the three heat settings. Power for high mode is 1500 watts; and low mode is 1000 watts. ECO mode is an Energy Saving Function.

Is comfort zone Made in USA?

All [ comfort zone ] products are produced at our headquarters in Parma, Italy.

Is comfort zone an American company?

Made in Italy since 1996, Comfort Zone is a professional lifestyle brand offering clean, results driven formulas, that respect both the skin and the planet.

How do you troubleshoot an infrared heater?

1. Broken heater / Measure resistance of heaters and replace if necessary with power OFF.
2. Loose heater wires at terminal blocks / Check and tighten wiring with power OFF.
3. Heater section fuse blown / Check for shorts to ground / Replace fuse.
4. SCR or SSR open/short circuit / replace SCR or SSR.

Why does my electric heater turn on and off quickly?

So, if your furnace keeps turning off and on too quickly, your thermostat might be malfunctioning or broken. There are several things that could be causing your thermostat to not work properly. The wiring could be old and need replacing, it might need new batteries, or it could be the location of your thermostat.

How do you start a comfort zone heater?

TURNING HEATER ON: To start the heater, turn the Power Control dial from OFF position to FAN, LOW, HIGH, or ENERGY SAVE setting. Then rotate the Thermostat Control clockwise to the HIGH THERMOSTAT position as described below. (During the heaters initial use, you may experience a slight odor or smoking.

What are the cons of infrared?

Following are the disadvantages of Infrared sensor: ➨Infrared frequencies are affected by hard objects (e.g. walls, doors) , smoke, dust, fog, sunlight etc. Hence it does not work through walls or doors. ➨Infrared waves at high power can damage eyes.

Why isn’t my space heater heating?

Unit not turning On: One of the most common issues you will come across with space heaters is that the unit does not turn on. If this is the case, check the switch. At times, the switch is not a snug fit for the socket and may not give power to the unit. Also check for a blown fuse.

Why is my space heater not heating up?

CAUSE: The most common cause for electric heater not working is blown fuses. SOLUTION: To check this, first unplug the device and check the fuse box of the house for blown fuses as well as tripped circuit breakers.