How does a Cistermiser standard valve work?

The valve is activated by short-term pressure drops created by use of taps or WCs on the same supply. The valve is normally closed; when it is activated it opens and water passes to the urinal cistern until the pressures on both sides of the diaphragm are equalised. When the cistern is full, the auto-siphon will flush.

How does a cistern miser work?

The urinals in our rugby club toilets are activated via a valve with Cisternmiser written on the grey casing. This valve seems to allow water into the main cistern which in turn fills and flushes the urinals.

What is a Cistermiser?

The Cistermiser standard urinal flush control valve is an automatic hydraulic urinal flush control valve. Using a simple and innovative mechanism, the Cistermiser saves water by only allowing the automatic flush cistern to fill up, and flush, when the washroom is in use.

What is urinal cistern?

Urine can leave salt deposits and a build-up of Uric acid, and not only leaves a foul smell behind but can begin to clog up your waste pipes. Urinal cisterns hold a volume of water that is used to flush around the urinal bowls and leave them rinsed, clean, and ready for the next user.

How does an auto syphon urinal work?

The auto-syphon will flush the urinals once the required amount of water is in the cistern. The short-term drops in water pressure are caused by the use of taps or toilet flushing within the washroom, which approximates the use of the urinals.

How does urinal Cistermiser work?

The valve uses a simple patented mechanism which prevents water waste by ensuring that the auto-flush cistern is only filled, and can only flush, when the washroom is used. This valve automatically manages the water supply to the urinal cistern and reduces water consumption by up to 80%.

How does an auto Syphon urinal work?

How do you adjust the water flow in a urinal?

Turn the water control screw counterclockwise to increase the flow in the urinal if the water level is too low. Start with a 1/4-inch turn and then flush the urinal. Wait for the urinal to fill and then make another adjustment if needed. Repeat this until you have the proper water level.

Do urinals flush automatically?

Auto-cistern Urinal Flush. Despite the name ‘auto cistern’ there is nothing automatic about them, they are simply a vessel for stored water with which the urinal will flush.

Does a urinal need to be vented?

So now the question comes up, if installing waterless urinals, which use no water whatsoever, do they need to be vented? The answer is yes. The waterless urinal must also be connected to the plumbing tree.

Can you use a bottle trap on a urinal?

White plastic bottle traps are the most widely used with urinals as they are the easiest to clean.

How do I make my urinal drain better?

Start simple by using a plunger on the urinal the same way you’d use one on a clogged toilet. If you aren’t having any luck, get a drain auger to snake the drain line and clear any blockages. If you need a heavy duty option, you can always use muriatic acid mixed with water to dissolve any blockages.

Does a urinal need a p-trap?

A standard urinal uses water to flush the urine into a pipe known as a “P-trap.” The shape of this pipe, which is not unlike the ones installed under most sinks in restrooms and kitchens, creates a water seal that prevents sewer gases from escaping into the restroom.