How do I reset my Epson TM T88V printer?

How do I reset my Epson TM T88V printer?

1 Answer

  1. Turn the printer off.
  2. Use a paper clip or tip of a pen to press and hold the reset on the back of the printer.
  3. While holding the reset button, turn the printer on.
  4. Continue to hold the reset button. After 5 seconds, a warning will print out. Release the reset button.

How do I connect my Epson printer to my network receipt?

Add Port & Install Printer

  1. Ensure your receipt printer is connected to the network and it is powered on (you should see a blue light)
  2. Use the Windows search bar to find the EPSON configuration utility by typing the Epson model name such as Epson TM-M30 Utility and click the application to open.
  3. Click Add port.

How do I turn on the USB port on my Epson TM T88IV?

First, the USB port is located under a plate on the back of your printer, to the right of the power connection, held on with a single screw. Remove the screw and plate to access the USB port. Video: How to activate the USB port. Press the feed button (and hold briefly) to exit….System Status.

Current Status
Help desk UP

How do I set up an Epson printer receipt in Windows 10?

Epson Connect Printer Setup For Windows

  1. Download and install the Epson Connect Printer Setup Utility.
  2. Agree to the End-User License Agreement, then click Next.
  3. Click Install, then Finish.
  4. Select your product, then click Next.
  5. Select Printer Registration, then click Next.
  6. Select Agree, then click Next.

How do I find the IP address on my Epson receipt printer?

Epson Receipt Printers (TM-T70, TM-T88, TM-M30 ethernet, TM-T20)

  1. Power the printer off.
  2. Press and hold the feed button.
  3. Power the printer on and continue to hold the feed button.
  4. After a few seconds a settings sheet will print, including the IP address of the printer:

How do I connect my Epson printer to a USB?

Plug the USB cable into the printer and the computer. Right-click the My Computer icon on your desktop, then click Properties. Click the Device Manager tab. If your drivers are correctly installed, EPSON USB Printer Devices should appear on the Device Manager menu.