How do I update Mayflash GameCube adapter on PC?

Download the firmware from https://www.mayflash.com/Support and install it on your Windows PC.

1. Push the switch on the side of the adapter to “PC mode” and plug the black USB port to your PC.
2. Select “Update Firmware”. Donot disconnect the device until you are informed that the updated was completed successfully.

How do I download Mayflash drivers?

Download the firmware from https://www.mayflash.com/Support and install it on your Windows system.

1. Press and hold the button on the side of the adapter, and connect the USB from your adapter into any spare port on your PC, and wait for 3-5 seconds.
2. Click “update” and wait for a few seconds.

Can I connect GameCube controller to PC?

Set up the GameCube to PC adapter Plug the adapter into an open USB port on your computer. Drivers will automatically install. Connect the GameCube controller to the adapter by plugging it into one of the ports.

Does the GameCube controller adapter work on PC?

Install the bundled vJoy program, which lets the GameCube controller speak to the PC. The GC adapter program will boot up, and you will need to click the “Start” button to enable it to work.

How do I reinstall my GameCube adapter driver?

Right-click on the Unidentified device and choose Update driver. From the next screen, click on Browse my computer for driver software. Make sure the checkbox associated with Show compatible hardware is checked, then select a driver from the list and hit Next to install it.

How do I get my GameCube controller to work on my PC?

Set up the GameCube to PC adapter

1. Plug the adapter into an open USB port on your computer. Drivers will automatically install.
2. Connect the GameCube controller to the adapter by plugging it into one of the ports.

How do I update Mayflash drivers?

Does the Mayflash adapter work on switch?

MAYFLASH Magic NS Wireless Bluetooth Controller USB Adapter for Switch,Switch OLED, Windows, Raspberry Pi, Compatible with Switch Pro, PS4,PS5 Controller and More.

How do I update the firmware on my Mayflash F300?

More Instructions

1. Press and hold “HOME”button on the Arcade Stick F300 ELITE. Plug the USB cable of F300 Elite into your PC.
2. As soon as the updater window indicates under “Device” that the Arcade stcik F300 ELITE has been recognized, you may release “HOME” button. Select “Update”.
3. Press “OK” to complete the update.