What does a fridge evaporator sensor do?

It is important that your freezer maintains a consistent temperature – not too low, not too high. This evaporator probe feeds this information back to the electronic control board, which keeps the freezer from over or under-frosting.

What temperature should my Miele fridge be?

We recommend a temperature of 5 °C in the refrigerator section. To freeze fresh food and to store frozen food for a long time, a temperature of -18 °C is required. At this temperature the growth of micro-organisms is generally halted.

Why is the red light flashing on my Miele freezer?

Temperature alarm If the temperature becomes too warm, an alarm sounds and the “alarm” indicator turns red and flashes and the temperature flashes in the control panel.

How do I know if my evaporator temperature sensor is bad?

Symptoms of a Bad or Failing Evaporator Temperature Sensor (Switch) Common signs include lack of cold air coming from AC, temperature fluctuations, and the AC compressor not activating.

What does red warning light on freezer mean?

Your freezer’s red light or high temperature alarm will turn on when it is not cold enough. This means the freezer is not be suitable for storing frozen food until the light has turned off.

Why is my Miele fridge light flashing?

The temperature display will flash if: – the temperature is not within the correct range, e.g. because the appliance has just been switched on. – a different temperature has just been set. – the temperature in the appliance has risen by several degrees, indicating that the appliance is warming up too much.

How do you replace an evaporator sensor?

1. Step 1: Locate the evaporator sensor.
2. Step 1: Disconnect the negative battery cable.
3. Step 2: Remove the sensor electrical connector.
4. Step 3: Remove the sensor.
5. Step 1: Install the new evaporator temperature sensor.
6. Step 2: Reinstall the electrical connector.
7. Step 3: Reinstall the negative battery cable.

What number should my Miele fridge be set at?

How do I fix the red light on my freezer?

The high temperature alarm or the red light indicator will be on when your freezer is connected to the mains for the first time. This means that the temperature inside your appliance is still too warm. Keep your freezer door closed and the light will go out in a few hours.

Why is my fridge Guard showing red light?

In normal operation, if the red LED comes on, indicating the incoming voltage is too low or too high, the FRIDGEGUARD will switch off the power to protect your appliance, starting the 3 minute time delay.