Do they make a toilet with a 10-inch rough-in?
Do they make a toilet with a 10-inch rough-in?
American Standard Edgemere White Elongated Chair Height 2-piece WaterSense Toilet 10-in Rough-In Size (Ada Compliant) in the Toilets department at Lowes.com.
How do I know if I need a 10 or 12 rough-in toilet?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
What is a 10in rough-in toilet?
When you wonder about ‘what a 10-inch rough-in toilet means’, it refers to the finished wall and the floor flange opening center distance of about 10-inches. 10-inch rough-in is usually found in the old models’ homes. Although, there are only fewer toilets options available.
Can you replace a 10-inch rough in toilet with a 12-inch rough in toilet?
Ideally, the toilet’s rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.
Are 10 rough in toilets smaller?
With a 10-inch rough-in toilet, the distance between the center of the drainpipe and the rear wall is 2-inch shorter than that of a 12-inch rough-in toilet. 10-inch rough-in toilets are not necessarily smaller. There are 12-inch rough-in toilets that are more compact compared to some 10-inch rough-in toilets.
Can you replace a 10 inch rough-in toilet with a 12 inch rough-in toilet?
Can you put a 12-inch rough-in toilet in a 10-inch space?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
What does a 10-inch rough in mean?
Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Can you replace a 10-inch rough-in toilet with a 12 inch rough-in toilet?
Can a toilet be moved a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
Which is better 1 piece or 2 piece toilet?
One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.
How far does a toilet need to be from a wall?
15 inches
Toilets and Bidets Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture.