How do I configure my BYO modem?

Log into your modem as per the manufacturer’s instructions, look for “Automatic Setup”, “Setup Wizard” or “Internet Options” and enter the below information based on your NBN connection type. Wait 10-15 minutes for the modem to go online.

Can I use a Bigpond modem with another provider?

We can never guarantee a modem from another provider will work, but in general, we have many customers using Telstra modems. Most Telstra modems will work with MATE, provided that they are compatible with your connection type and not locked to Telstra.

Can you use your own modem with Telstra?

In terms of whether you can use your own modem, router or modem-router when shifting internet plans, the usual answer is you totally can. This assumes that you’re shifting plans and not addresses, and that you’re also not shifting broadband technology types.

How does BYO modem connect to NBN?

plug in your BYO modem/router Take your Ethernet cable (this is typically blue, yellow, grey or white) and plug one end into the yellow port marked UNI-D1 on the back of the nbn™ HFC Connection Device. Plug the other end into the WAN port on your modem/router. This may also be labelled as INTERNET, WAN/LAN or FIBRE.

How can I use my own modem?

In most cases, you just need to plug the modem in, connect it to a router, and turn the devices on. It’s that simple. If you have any issues, simply call your provider. In most cases, the solution is simply a matter of adding you’re a modem to your account.

What is a BYO modem?

Should you Bring Your Own (BYO) router or use one from your new Broadband Provider? When signing up for a new broadband plan, you may think that you will need to use a new router (modem) supplied by your new broadband provider. This may mean paying an additional fee for the router and paying a delivery fee.

Are Telstra modems locked to Telstra?

Telstra Modem Telstra modems are not locked to the network.

Are Telstra smart modems unlocked?

If you’ve your prepaid Telstra 4G modem for over 6 months, your unlock fee will be $27.50. If you’ve used your modem for less than 6 months or it hasn’t been activated in over 6 months, then you’ll likely be charged anywhere from $50 to $150.

What does BYO modem mean?

Bring Your Own
Should you Bring Your Own (BYO) router or use one from your new Broadband Provider? When signing up for a new broadband plan, you may think that you will need to use a new router (modem) supplied by your new broadband provider. This may mean paying an additional fee for the router and paying a delivery fee.

Are Telstra modems locked?

Telstra Modem Telstra modems are not locked to the network. But, they do have fairly closed firmware on it. Unless you’re tech-savvy, you may have a hard time getting it configured to work with any other provider. So, you might be better off using an approved router for your current ISP.

Can I bring my own modem?

You can skip that monthly charge by using your own modem and router. Pretty much any router will work, but you’ll need to make sure that the modem is a DOCSIS 3.1 model. You can find a full list of supported modems here, on the Xfinity website.

Can you use a personal modem?

How do I get online to my BYO modem?

Once you have connected your device to your BYO modem, open the web browser on your connected device and type in your modem’s default gateway/admin IP address in the address bar. This will be printed on the bottom or back of your modem depending on the make and model. Some of the most common addresses are 192.168.

Should I BYO modem for NBN?

Our NBN Home Superfast & NBN Home Ultrafast plans are currently supplied on a “BYO modem” basis for new customers, which means that you’ll need to supply your own modem. Most modems in use today are technically capable of supporting speeds of approximately: Up to 300Mbps over WiFi.

Can you unlock a Telstra modem?

But the good news is that you can actually unlock your Telstra dongle or modem if you want to use another provider’s SIM card to get online. Thankfully, Telstra makes the process quite simple and straightforward, but it’ll probably cost you a fee. And if you want to do it yourself, you actually can.

Can I use a different modem with Telstra NBN?

If you’re connecting to the nbn network with us on an eligible plan, you won’t have to pay for a standard Telstra-supplied modem. This will be advised during your connection order. Good to know: You can choose to supply your own modem, but that would be at your expense.

Can any modem work with any provider?

In fact, your modem isn’t even like your router. Although your router will work no matter who your internet service provider is, your modem may not. Your modem will only work with a given set of ISPs. As a result, you need to be really careful when picking out a modem.

What do I do with my old Telstra modem?

1. Drop your devices into the Telstra eCycle boxes at any Telstra store. This is completely free and takes as long to do as it does to put a letter in the mailbox.
2. Speaking of mailboxes – through the Telstra eCycle program, we’ll cover the postage costs for you to send your devices off to be recycled.