How do I find out what year my Homelite chainsaw is?

How to Tell the Year of Homelite Saws

1. Look inside the owner’s manual of the chainsaw to see if there is a small sticker on it with two numbers.
2. Check near the base of the saw casing on the left-hand side to find a small sticker.
3. Call (800) 242-4672.

What size chain does a Homelite?

Usually, a larger pitch indicates a larger chain. Within Homelite Chainsaw Chains, chain pitches range from . 325 in. to 3/8 in. Which brand has the largest assortment of Homelite Chainsaw Chains at The Home Depot?

When was the Homelite xl12 made?

1963
The year 1963 saw the introduction of the world’s first “lightweight” chainsaw, the magnesium-alloy framed Homelite XL-12; the numeral twelve denoting that the power-head weighed a mere twelve pounds. This saw is widely regarded as one of the most recognizable and well-known chainsaws of all time.

How many cc’s is a Homelite chainsaw?

58.2 cc
The engine in the Homelite XL Chain Saw displaces 58.2 cc and has one cylinder. The bore is 1.8 inches and the stroke is 1.4 inches. The air filter is a cellulose fiber element, and the starter is a Homelite automatic rewind starter.

How do I decode my Homelite chainsaw serial number?

Turn the blue Homelite chainsaw upside down, and locate its metal identification tag. The tag is a metal plate with a series of numbers and letters ingrained in it. Locate the model number on the tag, and write it down. For instance, the model number of one blue chainsaw is UT-10712.

Are Homelite chainsaws any good?

The Homelite brand has a reputation for delivering affordable, functional tools with average homeowners in mind. This is on full display with the Homelite UT43122B electric chainsaw. It’s a good choice for occasional use and can handle pretty much any cutting job that’s likely to pop up around the yard.

Will an Oregon chain fit a Homelite chainsaw?

Chainsaw Bar & D59 Chain, Fits Homelite and Jonsered Models (29571) This product is only available through retailers or servicing dealers. This 16″ guide bar and chain combination features a 3/8″ chain ideal for occasional commercial users and professionals.

How do you measure a chainsaw chain?

Measure the distance from the tip of the chainsaw bar to the point where the bar first emerges from the saw’s casing. A tape measure will provide that information. Round the measurement up to the nearest even number if the figure was uneven or fractional. The resulting number is the bar measurement.

Are old Homelite chainsaws any good?

Are Homelite and Ryobi the same?

From what I understand from Home Depot, Ryobi and Homelite are made by the same company. Husqvarna makes a lot of trimmers that are rebranded (Craftsman’s and I think Black and Decker are two of them).

Did Homelite go out of business?

Deere & Company announced on Nov. 16, 2001 that it has sold its Homelite consumer products business.

What color is a Homelite chainsaw?

There are 3-4 shades of red that we have all seen, 2-3 shades of metallic blue, a metallic medium green, plus the white & black accents. I’ve repainted saws off and on for years, but one of my customers really turned me on to some good products that helped me restore a Homeite 900D for my collection.

How many cc is a Homelite Super 2?

The Super 2 has a larger (1.9 cubic inch- 31.14cc) engine and is, therefore, available with a choice. of 14-inch or 16-inch capacity bar and chain.

When did Homelite go out of business?

Nov. 16, 2001
Deere & Company announced on Nov. 16, 2001 that it has sold its Homelite consumer products business.

Is Ryobi the same as Homelite?

What chain is the Homelite Super 2?

The Homelite Super 2 Chain Saw UT-10654 chain is an extremely important part of the chain saw. The chain must effectively cut the wood fibers fast and cleanly. In order to carry the sawn wood chips away, the chain must have a sharp and durable cutting edge.

What size chain fits a Homelite Super 2?

12″ Bar & Chain for Homelite Super 2 XL XL2 XL-2CC XL-10 120DGEA061 / 91VXL048G.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What is the most common chainsaw chain size?

Most chainsaws use 0.050″ (1.3 mm) and 0.058″ (1.5 mm) gauge chains. 0.043″ (1.1 mm) and 0.063″ (1.6mm) gauge chains are less common.

Is Homelite chainsaw still in business?

The Homelite Corporation, maker of popular chainsaws for the home market, ceased being an independent company in 1954 when it was acquired by Textron. The Homelite brand was next sold to John Deere in 1994 and is still in production today by it’s most recent owner, Techtronic Industries.

What brand is Homelite?

Techtronic Industries TTI
HOMELITE – Techtronic Industries TTI.

What does 91 mean on chainsaw chain?

91 = 3/8 low profile pitch .050 gauge or 1.3mm. 95 = .325 pitch .050 gauge or 1.3mm. Carlton drive link codes. ​A1 = 3/8 pitch .050 gauge. A2 = 3/8 pitch .058 gauge.

What do the numbers on a chainsaw chain mean?

Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain. The second is the gauge, or the thickness of the drive lugs. 0.050″ (1.3 mm) and 0.058″ (1.5 mm) are most common, 0.043″ (1.1 mm) and 0.063″ (1.6mm) less common.

How long is a 72 Link chainsaw chain?

Amazon.com: Oregon Chainsaw chain for Stihl Chainsaw 20″ Bar Length 72 Drive links 3/8 Standard 0.05 Gauge : Patio, Lawn & Garden.

What does 73 mean on a chainsaw chain?

73 = 3/8 pitch .058 gauge or 1.5mm. 75 = 3/8 pitch .063 gauge or 1.6mm. 76 = 3/8 pitch .050 gauge or 1.3mm.