How do I pair Logitech speakers Z200?

How do I pair Logitech speakers Z200?

Connect the power cable to the speakers and a power source. 2. Connect your source device using the attached 3.5mm auxiliary cable. NOTE: You can also connect a device to the auxiliary input port on the front of the right speaker (below the music note icon).

Why is only one of my Logitech speakers working?

It sounds like your balance might be off. Open the Sound applet from the Control Panel and click the Configure button for your default sound device. Then go to the Levels tab and click on the Balance button. Adjust the sliders so that the balance is even on both the left and right speakers.

How many watts is Logitech Z200?

10 Watts
10 Watts Peak/5 Watts RMS power produces room-filling sound. Each speaker has one active/powered driver that delivers full range audio and one passive radiator that provides bass extension….

Brand Logitech
Speaker Type Computer
Series Z200
Speaker Size 3.5 Millimeters

How do you fix one speaker not working?

Ensure the speaker balance on the stereo system is set to the center position. Ensure the speaker wire is connected properly to the back of the stereo system. If the issue is not resolved, replace the speaker wire. If the issue is still not resolved, remove the speaker connections from the stereo system.

Why is only my left speaker working?

Check If “Mono Audio” Is On One of the sound settings that prevent speakers from working is the “Mono Audio” setting. In this case, only one speaker works, and the other one sounds off. To make sure you have this setting disabled, go to the Control Panel by typing it in the search box.

Why are my speakers not showing up?

Note if you don’t see the speakers in the device list, it may be disabled. In this case, right-click on the blank area and select Show disabled devices on the context menu. After it is listed, right-click on the speakers and click Enable. The problem also can be caused by outdated or missing audio drivers.