How do I program Vista 32FB?
How do I program Vista 32FB?
To enter program mode, enter installer code + [8] + [0] + [0] • To set standard defaults, press *97 • To change to next page of program fields, press *94 • To return to previous set of fields, press *99 • To erase account & phone number field entries, press [*] + field number + [*] • To assign zone descriptors, press # …
What is the default installer code for v32fb?
VISTA-32FB/VISTA-128FB Programming Form Standard default (*97) values are shown in brackets [ ]; otherwise, default = 0. 00, 02-15 times 15 seconds Maximum “03” for UL Commercial Burglary installations.
How many zones on a vista 32?
The VISTA-32FBPT provides the ultimate protection for life and property. This commercial fire and burglary control panel supports up to two partitions and up to 32 zones/points using hardwired, wireless and V-Plex® addressable technologies.
How many zones can a Vista 20P handle?
Wireless Zones on Vista 20P By default, Vista 20P control panel can protect up to 8 hardwired zones. But, you can add support for wireless zones by adding a wireless receiver to your Honeywell Vista 20P.
How many wireless zones does Vista 20P have?
40
With the VISTA-20P alarm control panel, a total number of (48) protection zones are supported. However, as the first (8) zones can only be programmed using the standard hardwired terminal zones found on the alarm control panel, the VISTA-20P really only supports a maximum of (40) wireless zones.
What is installer code?
The Installer Code (also called Program Code or Dealer Code depending on brand) is a special code used to access system configuration settings so a user can add sensors/zones, change delay times, modify central station telephone numbers and account numbers.
How many wireless receivers can you have on a Vista 20P?
one wireless receiver
The Vista 20P supports only one wireless receiver.
How do I view zones on Vista 20P?
How Do I Program a Wireless Zone on My Honeywell VISTA-20P?
- Access system programming. Enter the installer code (the default code is 4112) + 800 on a keypad.
- Access zone programming. Enter * 56.
- Select a zone.
- Program the zone.
- Exit programming.
- Test the sensor.
How do I know what zone I am in Vista 20P?
You can find the faulted zones by pressing the * key on the keypad. Disarming the system is also recommended. Also make sure that the battery is sufficiently charged. At the keypad of the 20P control panel, enter the master code + 5 at the ‘Dial or Walk’ screen to enter the walk test mode.
How do I reset my Honeywell Vista security system?
You can factory default a Honeywell VISTA P-Series System by activating the *97 command within system programming. A factory default will reset the Master Code to 1234, reset the Installer Code to 4112, delete any other user codes, clear all programmed zones, and restore default settings.
How many pages are in the Honeywell Ademco vista-32fb user manual?
Honeywell Manuals Security System Ademco VISTA-32FB User manual Honeywell Ademco VISTA-32FB User Manual Commercial fire and burglary partitioned security system with scheduling ademco vista series Hide thumbs Also See for Ademco VISTA-32FB Programming manual- 65 pages
What kind of security system is Ademco vista-32fb?
Honeywell Ademco VISTA-32FB User Manual Commercial fire and burglary partitioned security system with scheduling ademco vista series Hide thumbs Also See for Ademco VISTA-32FB
How do I log on to the vista-32fb master partition?
[✳] + the desired partition number. To log on to the “Master” partition (3 for the VISTA-32FB; 9 for the VISTA-128FB) using the GOTO command, and to perform any functions at a Master keypad, a user must have access to all partitions. Page 10: About The Keypads
What is a Honeywell Security system?
System Overview General Your Honeywell security system consists of a main control panel, at least one keypad, and various sensors strategically positioned throughout the premises. The system offers you three forms of protection: burglary, fire and emergency.