How do I setup my Buffalo wifi extender?

More videos on YouTube

1. Set the mode switch on the AirStation to “WB”.
2. Connect the AirStation to a computer with an Ethernet cable and power both devices on.
3. Move the AirStation next to the existing wireless access point.
4. Launch a web browser and enter the AirStation’s IP address into the address bar.
5. Log in to Settings.

How do I change my Buffalo router password?

Log in to Settings. The default username is “admin” and the default password is “password”. Click the “Wireless” tile. Enter a new SSID for the 11n and/or the 11ac network, then click Apply.

How do I reset my Buffalo AirStation WHR HP G300N?

To reset the Buffalo WHR-HP-G300N to its default settings, you have to do the following steps:

1. Switch on router.
2. Press RESET button and hold for at least 5 seconds.
3. Device restarts automatically.
4. Restoration of standard settings is finished.

How do I access Buffalo AirStation?

Connect the AirStation to the PC and power both devices on. Launch a web browser and enter the AirStation’s IP address into the address bar. If you do not know the AirStation’s IP address, check the setup card included in your AirStation’s package, or use AirStation Configuration Tool to display it. Log in to Settings.

What is wired bridge mode?

Bridge mode lets you connect two routers without the risk of performance issues. Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict. Connecting multiple routers can extend the Wi-Fi coverage in your office/home.

What is wired bridging?

Wired Bridge provides a transparent connection to all devices on the network. The Bridge will connect two network segment. The two segments are in the same subnet and the two Ethernet switches will be connected by a cable will appear as one switch to all computers on the subnet.