How do I stop OpenOCD?

Close the OpenOCD server, disconnecting all clients (GDB, telnet, other). If option error is used, OpenOCD will return a non-zero exit code to the parent process. If user types CTRL-C or kills OpenOCD, the command shutdown will be automatically executed to cause OpenOCD to exit.

How do I check my St-Link?

Now click on the Target Option Icon and from the new window that appear click on Debug and select ST-Link Debugger. Next click on the Settings anf from the new window that appear select JTAG, see below. Now click on the Utilities and select ST-Link Debugger, see below.

What is the purpose of the ST-link V2 1?

Description. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontrollers. The single-wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

Is OpenOCD a gdbserver?

OpenOCD complies with the remote gdbserver protocol and, as such, can be used to debug remote targets. Setting up GDB to work with OpenOCD can involve several components: The OpenOCD server support for GDB may need to be configured. See GDB Configuration.

Where is OpenOCD installed?

Installing OpenOCD on Windows Download the binary zip file for Windows. Extract into the C:\openocd-0.10. 0 folder. Add the path: C:\openocd-0.10.

Do I need st-Link?

You do not “need” it but you “need” a way to write your program to the flash on the part and that might desire an SWD solution of which the stlink is one (but not the only one). The stlink version should not matter.

How do I get OpenOCD?

Installing OpenOCD on Windows

1. Download the binary zip file for Windows.
2. Extract into the C:\openocd-0.10. 0 folder.
3. Add the path: C:\openocd-0.10. 0\bin to your Windows User Path environment variable. Note: You must add bin to the path.

What is St-Link Server?

The ST-LINK server is an application to share the debug interface of a single ST-LINK board among several host applications, typically a debugging tool and a monitoring tool.

How do I update ST-Link firmware?

Download the latest ST-LINK/V2-1 firmware upgrade. Extract the archive and run the STLinkUpgrade.exe program. Plug the Nucleo board to your PC using a standard USB cable and wait until the USB enumeration is completed. Press the Connect button.

How do I update STM32?

You unplug the stlink, and then plug in the stlink again. You click ST-LINK->Firmware update. click Device connect. Click yes to upgrade successfully.