How do I unlock my Cisco IP Phone 7942?

Cisco 7942

1. Press the Settings key.
2. Press 2 – Network.
3. Press **# to unlock the phone.
4. Press 7 – Admin Vlan (Virtual Local Area network) (Telephony Vlan)

How do I reset my Cisco 7942 to factory settings?

Resolution/Steps

1. Unplug the power cable from the phone and then plug it back in. The phone begins its power upcycle.
2. While the phone is powering up, and before the Speaker button flashes on and off, press and hold #.
3. Release # and press 123456789*0#.

How do I access my Cisco 7841 web interface?

How to access the web interface of Cisco 8861 or 7841 phone?

1. Press the Settings button.
2. Select Status.
3. Select Network Status.
4. Select either IPv4 Status or IPv6 Status, depending on which is used.
5. Note the IP Address.

How do I add an admin to a Cisco CallManager?

This section describes assigning privileges to a user group in Cisco CallManager Administration. Step 1 Choose User > Access Rights > Assigning Privileges to User Group. The Assign Privileges to User Group window displays. Step 2 Click the name of the user group to which you want to assign privileges.

How do I reset my password on a Cisco phone?

Step 1 In the Messaging Assistant, from the Passwords menu, select Change Cisco PCA Password. Step 2 On the Cisco PCA Password page, enter your current password. Step 3 Enter your new password, then enter it again to confirm it. Step 4 Select Save.

How do I unlock my local phone using Cisco Unified Communications Manager?

In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile Configuration window using Device > Device Settings > Common Phone Profile. Enter a password in the Local Phone Unlock Password option.

How do I modify network settings on the Cisco Unified IP phone?

The Cisco Unified IP Phone includes many configurable network settings that you may need to modify before the phone is functional for your users. You can access these settings, and change some of them, through menus on the phone.

How do I unlock my phone using the common phone profile?

In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile Configuration window using Device > Device Settings > Common Phone Profile. Enter a password in the Local Phone Unlock Password option. Apply the password to the common phone profile that the phone uses.

How do I use the security setup menu?

The Security Setup menu that you access directly from the Administrator Settings menu provides information about various security settings. The menu also provides access to the Trust List menu and indicates whether the CTL or ITL file is installed on the phone. The following table describes the options in the Security Setup menu.