# How do you converge a mesh?

## How do you converge a mesh?

Solution:

- Create a mesh using the fewest, reasonable number of elements and analyze the model.
- Recreate the mesh with a denser element distribution, re-analyze it, and compare the results to those of the previous mesh.
- Keep increasing the mesh density and re-analyzing the model until the results converge satisfactorily.

## How do you control a mesh in SOLIDWORKS?

To apply mesh control to multiple components:

- In the Simulation study tree, right-click the Mesh icon and select Apply Mesh Control.
- Click the FeatureManager design tree tab .
- In the FeatureManager flyout, select the components to which you want to apply mesh control.
- Under Selected Entities, select Use per part size.

**How do I refine mesh in SOLIDWORKS?**

Refine the mesh overall to produce better aspect ratios by moving the mesh slider towards the ‘fine’ side. Locally refine the mesh by right clicking on ‘mesh’ in the tree and applying a mesh control to specific entities.

### What does a convergence graph show?

Convergence Plots. Convergence plots use graphics to show how an error estimate or time step evolves during the solution process for nonlinear, time dependent, and parametric solvers.

### What is H adaptive?

H-adaptive meshing physically adjusts the size of the mesh cell in areas of the model where smaller mesh is needed, while p-adaptive meshing adjusts the polynomial order of the mesh to improve accuracy. This is all done automatically by the software based on a desired accuracy defined by the user.

**What are convergence requirements?**

Convergence Criteria

- Polynomial should be a complete polynomial i.e it must contain all the degree from 0 to the highest order of the derivative used in weak form.
- The polynomial should be contineous over the element and also differentiable upto the order of the derivatives in the weak form.

## What is meant by mesh convergence?

Rouiba Convergence: Mesh convergence determines how many elements are required in a model to ensure that the results of an analysis are not affected by changing the size of the mesh. System response (stress, deformation) will converge to a repeatable solution with decreasing element size.

## Why do meshing fail?

Answers. If the number of nodes and elements is more than 32K then there will be meshing failure since you are using student version software. Minimum elemental size isn’t small enough to have elements along any radius of curvature. Meshing also fails due to overlapping surfaces or bodies present in the component.

**How do I fix mesh failed in Solidworks?**

After meshing has failed, right-click the Mesh icon and select Failure Diagnostics. To identify the problem with a component, select it in the list box. All faces and edges of the selected component that caused the meshing to fail highlight in the graphics area.

### Can mesh be too fine FEA?

If your mesh is too coarse, the answers that you generate may not be as accurate as you need them to be. Conversely, if your mesh is too fine, the simulation will take much longer to run without providing any substantial improvement in accuracy.

### Why is mesh convergence important?

**How do you make a convergence plot in Solidworks?**

To generate convergence graphs:

- Run a static study using the p-adaptive method.
- Right-click the results folder and select Define Adaptive Convergence Graph.
- In the PropertyManager, select the components that you want to graph and click .

## What is mesh refinement in Solidworks?

Finite Element Analysis (FEA) provides a reliable numerical technique for analyzing engineering designs. The process starts with the creation of a geometric model. Then, the program subdivides the model into small pieces of simple shapes (elements) connected at common points (nodes).

## What is P-adaptive?

Using a p-Adaptive mesh setting allows the user to take advantage of mesh elements up to the 5th order. The user has control over the iteration process in a similar fashion to the h-Adaptive method. A value for change in strain energy, von Mises stress, or displacement can be set to control when the iterations stop.

**What is convergence error?**

Iteration or convergence errors occur due to the difference between a fully converged solution of a finite number of grid points and a solution that has not fully achieved convergence.

### What is mesh convergence analysis?

The process of mesh convergence involves decreasing the element size and analysing the impact of this process on the accuracy of the solution. Typically, the smaller the mesh size, the more accurate the solution as the behavior of the design or product is better sampled across its physical domain.