How do you make rib in Catia?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 .
3. Select the center curve, i.e. Sketch. 1 .
4. To go on with our scenario, maintain Keep angle.
5. Click OK .

How do I create a slot in Catia?

CATPart document.

1. Click Slot . The Slot Definition dialog box is displayed.
2. To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. Select the profile, i.e. Sketch. 2 .

What is rib Catia?

This task shows you how to create a rib, that is how to sweep a profile along a center curve to create material. To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile.

What is NX rib?

In NX, you can use the Rib command to add a thin-wall rib or rib network to a solid body by extruding an intersecting planar section.

What is slot Catia?

This task shows you how to create a slot, that is how to sweep a profile along a center curve to remove material. To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. To create slots you can combine the different elements as follows: Open profile.

What is shaft command in Catia?

This task illustrates how to create a shaft, that is a revolved feature, by using an open profile. You need an open or closed profile, and an axis about which the feature will revolve. Note that you can use wireframe geometry as your profile and axes created with the Local Axis capability.

What is Groove command in Catia?

Grooves are revolved features that remove material from existing features. This task shows you how to create a groove, that is how to revolve a profile about an axis (or construction line).