How do you reprogram SureFlap?

Answer

1. Remove the battery cover lid.
2. Press and hold the memory button for at least 10 seconds.
3. The indicator lamp will stay on for the duration that the button is held down.
4. When the memory is wiped, the catch will open and close automatically.
5. Let go of the memory button and replace the battery cover lid.

How long does a SureFlap last?

Typical battery life is over 6 months, and in many cases, up to twelve months with normal use. You can get solutions from our SureFlap self-help tool SureSolve which can walk you through all the troubleshooting solutions and solve problems for you instantly, or order spare parts if required! 1.

How do you reset the microchip on a pet feeder?

Reset the feeder to factory settings, holding down the Add Pet button for 10 seconds (until the light starts alternating red / green and the lid opens and closes). Then add your pets in to the feeder again.

Why is my SureFlap flashing?

How to tell if the batteries need replacing on the SureFlap Microchip Cat Flap. If the LED light starts flashing red every five seconds, this is an indicator that you need to replace the batteries.

How do I reset my SureFlap cat feeder?

1. Reset your SureFlap Microchip Pet Feeder to factory settings. To reset the feeder to factory settings, hold down the Add Pet Button for 10 seconds.
2. Re-Learn any pet(s) you would like to use the SureFeed Microchip Pet Feeder. When learning your pet into the feeder, make sure all other pets are kept away.

How long do batteries last in microchip cat flap?

Answer. If the LED light starts flashing red every five seconds, then this is an indicator that you need to replace the batteries. Note: You will have roughly 1-2 weeks to change the batteries.

What batteries does SureFlap use?

Mar 10, 2020Knowledge The SureFlap Microchip Cat Flap and the DualScan Microchip Cat Flap operate using 4 AA (1.5V) batteries. The SureFlap Microchip Pet Door, SureFeed Microchip Pet Feeder & SureFeed Sealed Pet Bowl operate using 4 C cell (1.5V) batteries.

What does flashing red light on cat flap mean?

How can I check if my cats microchip is working?

How to Scan a Cat for a Microchip

1. Scan a test microchip. You should always have a test microchip nearby to ensure the scanner is working properly.
2. Position your scanner.
3. Scan in a pattern.
4. Go slow.
5. Begin between the shoulder blades.
6. Scan the sides.
7. Scan before each step.

Why do microchips expire?

When a microchip scanner is passed over the pet, the microchip gets enough power from the scanner to transmit the microchip’s ID number. Since there’s no battery and no moving parts, there’s nothing to keep charged, wear out, or replace. The microchip will last your pet’s lifetime.

Why is my SureFlap hub flashing red?

If both the ears on your Hub are flashing red it means it has lost connection with a Pet Door. pressing the button on the base of your Hub for 10 seconds.

Why is my Surefeed blinking orange?

If your feeder is flashing an orange light, it is in Training Mode. This mode is designed to help your cats get used to the opening and closing lid without getting spooked. There are four stages to Training Mode, so if you’re struggling to switch out of it, keep pressing the Fn button until the light turns green again.

How do you reset a microchip pet feeder?

Can I use rechargeable batteries in SureFlap?

Answer. We do not recommend using rechargeable batteries with Sure Petcare products, however, in the SureFlap Microchip Pet Door and Microchip Pet Door Connect you are able to set the low battery threshold to a lower setting by putting the unit into custom mode 2.

Can cat microchips stop working?

The microchip has no battery or moving parts. This means it won’t wear out and it remains completely inactive until scanned when its unique number is transmitted to the scanner and displayed on the screen.