How much does a 2 inch shackle weigh?
How much does a 2 inch shackle weigh?
Tell a Friend
| Product: | DRSPA200 |
|---|---|
| Approx. Weight Each: | 40.10 lbs. |
| Working Load Limit: | 35 Tons |
| Pin Diameter: | 2.25″ |
| Throat Opening: | 3.25″ |
How do you measure clevis shackle?
Measure the mouth opening of the clevis. Use the smaller jaws to measure from one inside edge of the clevis opening to the other inside edge. Make sure the caliper jaws are not cocked or you will get an inaccurate reading. Document your reading on the same piece of paper you recorded the other readings.
How do you determine the size of a shackle?
Shackles are sized according to the diameter of the bow section rather than the pin size. Never use a shackle if the distance between the eyes is greater than listed in the manufacturer’s tables.
How much weight can a 3/4 clevis hold?
2.34 lbs. Never exceed Working Load Limit. Inspect Shackles regularly. Replace if worn, distorted or damaged.
How much can a 3/4 shackle hold?
Hooks – Quenched & Tempered
| Nominal Size (in.) Diameter of Bow | Carbon Maximum Working Load (Tons) | Alloy Maximum Working Load (Tons) |
|---|---|---|
| 3/4 | 10 | 15 |
| 7/8 | 15 | 22 |
| 1 | 20 | 30 |
| 1-1/8 | 25 | 37 |
How do I know my clevis pin size?
Answer one: Clevis Pins are measured from under the head to the end of the pin. The grip length of the pin can be calculated by taking the length and subtracting the HC (Hole Centre) and half of the hole diameter.
What is difference between clevis and shackle?
Shackles are primarily used in construction, rigging and lifting. A clevis is used in less demanding applications such as farming and towing. NOTE: Alloy steel shackles should be used for overhead lifting. Shackles with round pin solely restrained with a cotter pin are not recommended for overhead lifting.
How are clevis measured?
The length of a clevis pin is measured from under the head to the end of the pin. The effective grip length should be measured from under the head to the top of the hole.
Is there a difference between a shackle and a clevis?
What size Crosby screw pin anchor shackle has a minimum ultimate strength of 3 tons?
Hooks – Quenched & Tempered
| Nominal Size (in.) Diameter of Bow | Carbon Maximum Working Load (Tons) | Alloy Maximum Working Load (Tons) |
|---|---|---|
| 5/16 | 1-1/2 | 2 |
| 3/8 | 2 | 3 |
| 7/16 | 3 | *4-1/2 /5 |
| 1/2 | 5 | 7 |
What is grip length for a clevis pin?
Product Overview Hayn clevis pin, 3/8″ dia. with a grip length of 1.0″. Hayn clevis pins are manufactured from marine-grade corrosion-resistant 316 grade stainless steel.