How much does it cost to drill a borehole per meter?

The average drilling cost is around R 600 a metre, according to the Borehole Water Association of Southern Africa (BWA). Once drilling is done and groundwater has been found, there’s another outlay for installing a pump – about R25 000 to R30 000 – and then about R 12 000 for the laboratory water tests.

How much does it cost to drill a bore hole?

On average the quotation for drilling borehole can cost as low as Ksh 500,000 and as high as Ksh. 6 million which is an average borehole drilling price in Kenya.

Are boreholes expensive?

There is no denying that installing a borehole is going to be expensive due to the complexity of the project which must be done by a professional that has access to high tech equipment.

What is the ideal depth of a borehole?

Depth of about 220 m is suggested for boreholes to be drilled in the area. Generally, variation in the depth extent of pollution in the regions of investigation could be as a result of variation in the level of abstraction of water from boreholes in the regions.

Can I sell my borehole water in South Africa?

Water from private boreholes is not meant for sale The recent practice of secondary trade of water particularly as observed currently in the Western Cape is therefore illegal. Private boreholes are for private use, for reasonable domestic use, and therefore not to be commercialised.

Do you pay for borehole water in South Africa?

Although in most cases a municipality will not charge you anything for the water drawn from a borehole, there are considerable costs associated with the sinking of the borehole.

How much does it cost to put in a water bore?

Q: How much does it cost to have a bore installed? A: The cost depends on the material being drilled and depth to water at your location. Most domestic bores range between $3,300-$6,500, depending on optional extras.

How is Borewell drilling cost calculated?

Average borewell casing pipe price per feet is 200 rupees/feet. Traditionally, casing depth of 40 feet is preferred. Cost of borewell casing for 40 feet = 40 x 200 = 8000 INR. All the above cost incurred is just the borewell cost of drilling.

How much does a deep water drilling rig cost?

A supply shortage for classes of offshore rigs capable of drilling in up to 10,000 feet of water means that the daily rate that operators pay to rent a high-end, deep-water drilling rig is now $500,000 to $550,000.

Do I need a license for a borehole?

If you wish to abstract water from an underground source, such as a well or borehole, you will usually require a groundwater investigation consent to construct and then carry out a pumping test before you can apply for an abstraction licence.

Do you have to register a borehole in South Africa?

Essentially, if you are using water under this General Authorisation you only need to register this water use with the Department of Water Affairs and Forestry if you use more than 10 cubic meters from a borehole on any one day, or you store more than 10,000 cubic meters of water per property.

Is borehole drilling in South Africa an investment?

The Costs Involved in Borehole Drilling in South Africa While a borehole is definitely an investment, there are costs that need to be taken into account before the decision to start borehole drilling is reached.

What determines the cost of borehole drilling?

Borehole Drilling Cost is mostly dependent on its depth, the amount of covering used and the pump specifications. Although many individuals assume the easiest drilling to be into soft and loose surfaces, the opposite holds true.

What size casing do I need for a borehole in South Africa?

Residential boreholes in South Africa are often drilled with a 215mm diameter. This will allow a steel casing of around 165mm to be installed down the hole that has just been drilled. In theory, the borehole should be cased in the steel from the top of the hole to the bottom of the hole. Read more on the advantages of solar energy

What is a borehole and how long does it take?

A borehole is a long narrow shaft that is drilled into the ground to locate and extract underground water. BWA argues that they can take about three to five days to install. Also, BWA states you should contact your local municipal offices to find out if you need permission to drill a borehole in your area.