How much does Oklahoma flagstone cost?
How much does Oklahoma flagstone cost?
Flagstone Price Per Ton Minimum – A lower priced flagstone, such as Oklahoma Brown, costs around $200 per ton. Average – A mid-range material costs from $350 to $500 per ton. The greatest variety is found in this price range.
How much does a pallet of Oklahoma flagstone cost?
$275.00/ton when purchased by the pallet or $0.25/lb.
How much is Oklahoma stone?
$260/TON. Oklahoma Flagstone is a flat stone usually used for patios, walkways, pool coping, outdoor kitchens and other landscape related projects.
What type of stone is Oklahoma flagstone?
Sandstone
Flagstone is usually a form of a sandstone composed of feldspar and quartz….$300/ton.
| Region of Origin | Southeast Oklahoma |
|---|---|
| Type of Stone | Sandstone |
| Coverage | 150 sqft per ton |
Are pavers or flagstone cheaper?
On average, yes, flagstone costs around $2 to $3 per square foot while pavers range from $3 to $6. However, in the end, the flagstone flooring project costs more than pavers. The overall material costs a bit more, and the labor to install it’s pricy too.
What color is Oklahoma flagstone?
Oklahoma Blue Flagstone is a beautiful bluish-gray color with a slightly rough and weathered appearance. It can be used for patios, walkways or stepping stones, as well as pool coping and wall caps. While all of our fieldstones and flagstones work well together, some are more complimentary to each other.
Where is Oklahoma flagstone from?
Southeast Oklahoma
Flagstone is usually a form of a sandstone composed of feldspar and quartz….$300/ton.
| Region of Origin | Southeast Oklahoma |
|---|---|
| Type of Stone | Sandstone |
| Coverage | 150 sqft per ton |
| Uses | Walkways, Patios, Walls, Pool Coping, Fire Pits, Water Features, Veneer |
What is Oklahoma flagstone?
Oklahoma Flagstone is a flat stone usually used for patios, walkways, pool coping, outdoor kitchens and other landscape related projects. Flagstone is usually a form of a sandstone composed of feldspar and quartz.
What do you put under flagstone?
The Bottom Layer of Base: Crushed limestone is the best material for the bottom layer of a patio base. Using a metal bow rake, spread the limestone one inch thick over the entire area of the patio and tamp it down. Repeat this process until you have four to five inches of compacted limestone.