What are the dimensions of a water filter?

Replacement Water Filter Cartridge Sizes There are four main sizes for standard water filter housings: 2.5“ x 10“ 2.5“ x 20“ 4.5“ x 10“

How do you measure a pool filter cartridge?

Always start by measuring the width (diameter) of your old cartridge across the outside edges of the end cap at its widest point. Note: Measurements may vary by about 1/8″ due to expansion, shrinkage, etc. For example, if you measure as a 5″ diameter, and can’t find a match, it may actually be a 4-15/16″ filter, etc.

Are pool filters all the same size?

There are usually 4 or 5 types of filter sizes. The smallest for above-ground pools, mid-range for small pools around 15,000 gallons, and large filters for large pools above 25,000 gallons. This is pretty straight forward, but you’ll want to make sure your filter size is not too small when compared to your pump.

What are the numbers on a water filter?

This determines the size of particles that the filter will allow to pass through. A 50 micron rated filter will allow larger particles to pass through than say a 5 micron rated filter. Common micron ratings for filters are 100, 75, 50, 25, 10, 5, 1 and 0.5.

How do I know what size cartridge filter to buy?

Filter Size The filter flow rate must be rated at least the same GPM as your pump, or higher. With pool filters, it’s best to err on the larger size so it can handle the power of your pump. A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.

Where is the model number on a Pentair filter?

You may find your serial number located on the product or the packaging. and in some cases, serial number may be on your receipt.

Are pool filters universal?

Filters are universal in pool systems, linked to the circulation system along with the motors and pumps. As water pumps through the circulation system of a pool or spa, impurities are strained by a filter.

How do you size a cartridge filter?

What does the number on a water filter mean?

What do the numbers on a pool filter mean?

Once you turn on your pool pump, that number on your gauge is your new baseline pressure. And after you clean it out for the first time—meaning you backwash your sand or D.E. filter, or rinse down your cartridge filter with cleaner—write down that PSI number, too.

What is the difference between A and C pool filters?

The only difference between a type A and Type C is the internal diameter of the filter. The A/C Filter type is a hybrid which has an internal rim with a 1-3/4″ internal diameter which will deform to 2″ if the pump really needs an A filter.