What causes your gauges not to work?

When one gauge stops working, the problem may be in the gauge itself or a bad sensor, while all the gauges cutting out at the same time often indicates a blown fuse or a defective instrument cluster.

How do you reset a gauge cluster?

Push and release the Sel/reset button button 3 times repeatedly. The instrument cluster begins its self-test. Each successive press of the Sel/reset button initiates a new cycling of all the gauges. To end, turn the ignition switch to OFF, or vehicle speed exceeds 1.5 mph.

Can the instrument cluster cause loss of power?

3. Inoperable instrument cluster. An inoperable instrument cluster is another symptom of a possible issue with the vehicle’s instrument voltage regulator. If the instrument voltage regulator fails completely, power to the cluster will be disabled and it will cease to function.

How do I know if my instrument panel is bad?

Signs of a bad instrument cluster include dim/flickering gauges, inaccurate or unreliable readings, all gauges dropping to zero while driving, and an unworkable instrument cluster. These error symptoms can result in your vehicle going out while driving, displays failing occasionally, or complete/intermittent failure.

How do I know if my gauges are bad?

Turn on the engine’s ignition and probe with a multimeter between the ground and the positive terminal on the back of the gauge; it should be marked with a “+” or an “I.” If there is no voltage then the fault is in the ignition circuit—and the gauge is probably good.

Why won’t my instrument panel light up?

The Instrument Panel Is Completely Dark If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.

Where is the fuse for the gauges?

The instrument panel fuse block is located in the instrument panel, on the driver side of the vehicle. To access the fuses, open the storage compartment.

Can a bad battery cause gauges not to work?

It is possible for low battery voltage to cause this problem. It is also possible that this problem is being caused by bad instrument cluster wiring, or a problem in your main fuse box.

What are the symptoms of a bad instrument cluster?