What does DDS stand for in electronics?

What does DDS stand for in electronics?

Direct digital synthesis (DDS) is a method of producing an analog waveform—usually a sine wave—by generating a time-varying signal in digital form and then performing a digital-to-analog conversion.

What is DDS clock?

Direct digital synthesis (DDS) is a method employed by frequency synthesizers used for creating arbitrary waveforms from a single, fixed-frequency reference clock.

What is jitter in ADC?

Any deviation or uncertainty of the time interval between two samples with respect to the ideal interval, defined as jitter, translates into sampling errors that degrade the signal quality at the ADC’s output.

What is a DDS module?

The AD9850 DDS Signal Generator Module provides 0-40MHz sine and square waves. It is equipped with a powerful 125Mhz Oscillator and excellent for a signal generator and oscilloscope based DIY projects. The module has a small compact size of approx 4.5×2.6×1.7 cm.

What does DDS stand for in engineering?

Technology, Electronics, Signal. Technology, Electronics, Signal. 1. DDS. Discrete Dynamic System.

Is DDS a word?

Dds definition Doctor of Dental Surgery.

What is DDS oscillator?

A DDS oscillator consists of a numerically controlled oscillator, a digital-to-analog converter, and a lowpass filter. From: Linear Feedback Controls (Second Edition), 2020.

What is DDS jamming?

DDS Jammers are dual application electronic warfare systems. They can be used to counter roadside bombs as well as attack enemy radio communications.

What is aperture jitter?

This sample-to-sample variation in the instant the switch opens is called aperture uncertainty, or aperture jitter and is usually measured in rms picoseconds. The amplitude of the associated output error is related to the rate-of-change of the analog input.

What is jitter clock signal?

1 Introduction. Jitter is the timing variations of a set of signal edges from their ideal values. Jitters in clock signals are typically caused by noise or other disturbances in the system.

What is DDS FPGA?

DDS consists of four modules of phase accumulator, phase converter, digital analog converter and low pass filter, which control the synchronization of all parts of DDS through clock frequency (clk). In this paper, FPGA technology is used to design the various modules with Verilog HDL language, and combined with Fig.

What does DDS stand for data?


Acronym Definition
DDS Digital Data Standard
DDS Domestic Data Service
DDS Data Display System
DDS Dynamic Data Store

What is DDS means in social media?

The term commonly refers to a group of people (including netizens) engaging in internet trolling and disruptive behaviour online to defend Duterte. Its initialism, DDS, was taken directly from the Davao Death Squad—a vigilante group that had existed in Davao City during Duterte’s term as mayor.

What does DDS stand for in business?

DDS Business Abbreviation

3 DDS Damped Diaphragm Steel Motorcycle, Model
1 DDS Data Delivery Service + 1 Flow, Delivery, Software
1 DDS Data Delivery Service s Flow, Technology, Atmosphere
1 DDS Data Distribution Standard Distribution, Architecture, Technology
1 DDS Data Distribution Systems Military, Distribution, Networking

How is the output for frequency of a DDS changed?

The basic DDS system described above is extremely flexible and has high resolution. The frequency can be changed instantaneously with no phase discontinuity by simply changing the contents of the M-register.

How does direct digital synthesizer work?

A direct digital synthesizer operates by storing the points of a waveform in digital format, and then recalling them to generate the waveform. The rate at which the synthesizer completes one waveform then governs the frequency.

Why is aperture time important?

For almost everyone, the maximum aperture will be more important, because it tells you how much light the lens can gather at its maximum (basically, how dark of an environment you can take photos – and how much of a shallow focus effect you can achieve).

What is aperture time in ADC?

Referenced to the ADC inputs, aperture time, te’, is defined as the time difference between the analog propagation delay of the front-end buffer, tda, and the switch driver digital delay, tdd, plus one-half the aperture time, ta/2.