What does line console 0 mean?

The use of “line console 0” command is to connect a switch/router through medium console. If there is only one console port, you can only choose “line console 0”. However if you have more than the number goes as 1,2,3,4 You can set different or same password to all your console ports.

What is Cisco line aux 0?

line aux 0. The auxiliary port is used for out-of-band configuration of your router/switch, which is typically accomplished via a modem. The auxiliary port supports hardware flow control and the console port does not.

What is line Vty 0 4 in Cisco router?

VTY is a virtual port and used to get Telnet or SSH access to the device. VTY is solely used for inbound connections to the device. These connections are all virtual with no hardware associated with them. The abstract “0 – 4” means that the device can allow 5 simultaneous virtual connections which may be Telnet or SSH.

How do I connect to my Cisco AUX port?

It is easy to do it.

1. 1) Connect the console interface of the router/switch to the router aux interface using a rollover cable.
2. 2) Configure the router aux interface with the transport input (in my example, I enable the telnet protocol).
3. 4) Access to the console via AUX port.
4. Remember:

What is terminal command line?

Terminals, also known as command lines or consoles, allow us to accomplish and automate tasks on a computer without the use of a graphical user interface.

What is the use of line Vty 0 4?

What does the command line Vty 0 1 mean?

What is the router prompt for the interface configuration mode? router (config-if)# What does the command line vty 0 1 mean? The “0 1” represents the number of vty lines to which the following configu- ration parameters will be applied. The two virtual terminal connections are identified as 0, 1.

What is a line Vty 0 4?

VTY is solely used for inbound connections to the device. These connections are all virtual with no hardware associated with them. Related Blog – VTY Password. The abstract “0 – 4” means that the device can allow 5 simultaneous virtual connections which may be Telnet or SSH.

What is line aux Cisco?

Most Cisco routers include an additional auxiliary (Aux) port as a backup async port. This port is commonly used as a dial-up port for remote router management. It is connected to a modem and enables an administrator to make a phone call to connect to the router’s CLI.

How do I get to the command line interface?

Open the command-line interface

1. Go to the Start menu or screen, and enter “Command Prompt” in the search field.
2. Go to Start menu → Windows System → Command Prompt.
3. Go to Start menu → All Programs → Accessories → Command Prompt.