What ink does HP OfficeJet 7110 use?

Original Ink Cartridge HP 933 XL (CN054AE) (Cyan) for HP Officejet 7110

Category	Inkjet Cartridges	Available in 24h
Type	Original	263 szt
Class	Ink Cartridge	8.5 ml
Color	Cyan	825 pages
Manufactured by	Hewlett-Packard (HP)	12.97 gr/page

How do I clean the printhead on my HP OfficeJet 7110?

From the desktop, double-click the icon for your HP printer. Click Maintain Your Printer, and then click Clean Printheads. Wait while the printer cleans the printhead, click OK, and then click Print Quality Diagnostics Page to see if the issue is resolved. Check Test Pattern 2 for defects.

How do I setup my HP OfficeJet 7110?

Setting up the printer

1. Step one: Check the contents of the box. Follow these steps in order.
2. Step two: Unpack the printer.
3. Step three: Connect the power supply and the power cord, and then turn on the printer.
4. Step four: Load paper.
5. Step five: Install the cartridges.

How do I change the ink cartridge on my HP Officejet 7110?

Replacing cartridges

1. Press the Power button to turn on the printer, if it is not already on.
2. Open the cartridge access door.
3. Push in on the front of the cartridge to release it, and then pull it toward you to remove it from its slot.
4. Remove the new cartridge from its packaging.

How do I print a test page on HP 7110?

How to print a Print Quality Diagnostic Page

1. Load plain white paper into the input tray.
2. On the printer control panel, press and hold the Power button, press the Cancel ( ) button seven times, press the Resume ( ) button twice, and then release the Power button. The page prints.

How do I connect my HP OfficeJet to WIFI?

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)

1. Place the printer near the Wi-Fi router.
2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
3. Select the name of your network, and then enter the password to complete the connection. Note:

How do I change the IP address on my HP OfficeJet 7110?

1. Open the embedded web server.
2. Click the Network tab, and then click IPv4 Configuration in the Wired (802.3) section.
3. In the IP Address Configuration section, click Manual.
4. A message appears warning that changing the IP address removes the printer from the network.
5. Change the IP settings:

How do I load paper into my HP OfficeJet 7610?

To load oversized paper, pull the input tray extender out as far as possible. Slide out the paper width guides as far as possible. Insert a stack of clean, unused, plain paper into the input tray with the short edge forward and the print side down.