What is a 14-50R outlet used for?

Built to the NEMA 14-50R standard, this receptacle is most commonly used for NEMA 14-50 extension cords, NEMA 14-50 electric vehicle extension cords, and NEMA 14-50 extension cords for RVs and electric ranges.

What does NEMA 14-50R mean?

In your home, there are two 4-prong outlets that often get confused because of how similar they look. These are NEMA 14-30R and NEMA 14-50R. The NEMA 14-30R outlet is used for a clothes dryer, while the NEMA 14-50R outlet is used for an electric cooking range.

What is a 14 30 plug used for?

NEMA 14-30 (30A plug). This is commonly used for electric dryers. It’s installed onto a dedicated 30A circuit to match the rating of the plug.

What is a NEMA 14 30 plug?

The NEMA L14-30 twist lock receptacle is the type you usually find on portable generators that provide 240-volt electricity. The plug is rated by the National Electrical Manufacturer Association to supply 240-volt electricity at a maximum current of 30 amps.

What size breaker do I need for a 14-50 outlet?

NEMA 14-50 on a 30 AMP breaker.

What size wire do I need for a NEMA 14-50 outlet?

NEMA 14-50R (or NEMA 6-50) outdoor enclosure. Shade for the unit (if mounted to the south side of a building) so it is not in direct sun, exceeding the 90°C mark. #8AWG copper wire with 3 conductors and a ground. If single conductor THHN wire is used, the ground may be #12AWG per NEC 250.122 calculations2.

Is L14-30R same as L14 30P?

NEMA L14-30P locking male plug to L14-30R extension power cords, rated for 30A, 125/250V. Insert the male plug and then twist to lock in secure power connections for important equipment such as PDU’s or Generators….NEMA L14-30 Locking Extension Cords.

Male Plug	L14-30P
Amperage	30A
Voltage	125/250V
Pins	Locking
Wire Gauge	10/4 AWG

Can I use a 50 amp outlet on a 30 amp circuit?

30 amps is where a 30 amp breaker should cut off, and to avoid that, you should only use 80% of the breaker’s capacity. So for a 30 amp breaker, you shouldn’t be using more than 24 amps. Using a 50 amp breaker and a dedicated outlet ensures that you don’t exceed the capacity of the circuit with that appliance.

Whats the difference between L14 30P and L14-30R?

One L14-30P male plug and one L14-30R female connector, used for making a generator power cable. Rated for 30A, 125/250V, the male L14-30P plugs into a generator receptacle, and the female L14-30R plugs into a male plug or inlet box. Rated for 7500W Generators.

What is the difference between 14-30P and 14 30R?

It is a NEMA 14-30P to NEMA L14-30R. The NEMA 14-30P is a 30 Amp, 125/250-Volt, 4-prong dryer outlet plug. The NEMA L14-30R is a 30 Amp, 125/250-Volt, 4-prong female connector. The product is heavy-duty, compact and contains nickel-plated plugs and terminals to prevent rusting.

Do you need neutral wire with NEMA 14-50?

A NEMA 14-50 plug has two “hots,” a ground, and a neutral. Typically, NEMA 14-50 is the recommended 50- amp plug, as it is the most versatile option. As with the 14-50, 50 is also the maximum amperage for the NEMA 6-50 plug.

What is the difference between 14 30P and 14 30R?

Is L14 30 single phase?

L14-30 is for 125/250 VAC single-phase and is commonly called a “generator plug”, found on gensets that serve both 125 and 250 volts.

Can I replace a 30 amp breaker with a 50 amp breaker?

The breaker for the circuit cannot exceed the wire rating. That is, a 50 amp breaker cannot be used on a wire rated for 30 amperes: doing so would allow the wire to overheat leading to a house fire.