What is Group F-2 occupancy?
What is Group F-2 occupancy?
Group F [Factory]: California Building & Fire Code This supports almost any manufacturing concern. The second is the F2 Group which is for moderate hazard manufacturing. This supports beverage, ice, metals, foundries, glass, gypsum, masonry, and similar facilities.
What is an F-2 building?
Factory industrial uses that involve the cleaning, laundering, fabrication or manufacturing of noncombustible materials which during finishing, packing or processing do not involve a significant fire hazard shall be classified as F-2 occupancies and shall include, but not be limited to, the following: Appliances.
What is a Group F 1 occupancy?
Group F-1: A space used for factory industrial uses not classified as occupancy group F-2. Group F-1 is also known as a moderate-hazard factory use. This includes but is not limited to the following examples: Aircraft manufacturing, not to include repair.
What does r2 occupancy mean?
R-2 Residential occupancies containing sleeping units or more than two dwelling units where the occupants are primarily. permanent in nature, including: Apartment houses. Boarding houses (not transient)
What is a high hazard industrial occupancy?
High-hazard industrial occupancy (Group F, Division 1) means an industrial occupancy containing sufficient quantities of highly combustible and flammable or explosive materials which, because of their inherent characteristics, constitute a special fire hazard.
What is r3 OCC group?
R-3 Residential occupancies where the occupants are primarily permanent in nature and not classified as Group R-1, R-2, R-2.1, R-4 or I, including: Buildings that do not contain more than two dwelling units. Adult care facilities that provide accommodations for six or fewer clients of any age for less than 24 hours.
What is a light hazard occupancy?
Light hazard occupancies shall be defined as occupancies or portions of other occupancies where the quantity and/or combustibility of contents is low and fires with relatively low rates of heat release are expected.
Which materials could be in a low hazard storage occupancy?
311.3 Low-Hazard Storage, Group S-2
- Asbestos.
- Beverages up to and including 16-percent alcohol in metal, glass or ceramic containers.
- Cement in bags.
- Chalk and crayons.
- Dairy products in nonwaxed coated paper containers.
- Dry cell batteries.
- Electrical coils.
- Electrical motors.
What is a hazardous occupancy?
Buildings and spaces shall be classified in the high hazard occupancy group when they are used for storing, manufacturing, or processing potentially-explosive products or materials, or highly-combustible or highly-flammable products or materials that are likely to burn with extreme rapidity.
How is hazard occupancy calculated?
The basic approach for this determination is to compare the amount of hazardous material present (for each hazardous material category in each control area) to the limits from the IBC. If the quantity exceeds the limit, the area should be classified as Group H occupancy.
What is a low hazard occupancy?
Class 6. Occupancies in this class are considered LOW hazard occupancies, where quantity and combustibility of contents are moderate. Any fire would tend to develop at a moderate rate and have moderate rates of heat release. Examples: Armories.
What is s2 storage?
Storage Group S-2 occupancies include, among others, buildings used for the storage of noncombustible materials such as products on wood pallets or in paper cartons with or without single thickness divisions; or in paper wrappings.
What is F2 occupancy?
Medium Hazard, Group F Division 2 (F2) Industrial occupancy in which the combustible content is more than 50kg/m2 or 1200 MJ/m2 of floor area and not classified as a high hazard industrial occupancy. Low Hazard, Group F Division 3 ( F3 )
What are the types of occupancy?
Primary Residence. These are the homes that you plan on spending the majority of your time—homes and condos that qualify as your main place of living.
What is Group F occupancy?
– 302.1.3 Pharmacies; Veterinary Facilities; Barbering, Cosmetology or Electrolysis Establishments; And Acupuncture Offices. See Chapter 12. – 303.7 Fixed Guideway Transit Systems. – 306.3 Low-Hazard Factory Industrial, Group F-2. – 309.2 Quantity of Hazardous Materials. – 311.2 Moderate-Hazard Storage, Group S-1. – 311.3 Low-Hazard Storage, Group S-2.
What are occupancy classifications?
Occupancy classification is the formal designation of the primary purpose of the building, structure or portion thereof. Structures shall be classified into one or more of the occupancy groups specified in this section based on the nature of the hazards and risks to building occupants generally associated with the intended purpose of the building or structure.