What is the function of bending?

Bending is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in ductile materials, most commonly sheet metal. Commonly used equipment include box and pan brakes, brake presses, and other specialized machine presses.

What is a joggle bend?

Joggle presses (otherwise known as a bending press) can form multiple bends on sheet metal at the same time. Often, these bends are in opposite directions and less than 90°. This process is very useful in the formation of aerospace parts such as stiffeners, ribs, firewall assemblies, webs, formers, covers, and more.

What are the safety rules in bending?

Always use safety goggles to protect your eyes from fine particles that fly during the bending process. Make use of work boots. They prevent any scrap, or pointed material from hurting your feet. Avoid running your hands over a sharp cut, even if you are wearing gloves.

What is a joggle in sheet metal?

A joggle, often found at the intersection of stringers and formers, is the offset formed on a part to allow clearance for a sheet or another mating part. Use of the joggle maintains the smooth surface of a joint or splice.

What is the purpose of a joggle?

A joggle is a small offset near the edge of a piece of sheet metal that allows the sheet to overlap another piece of metal.

What are techniques in bending pipe?

There are several ways of bending a pipe or tube, and below are five of them:

• Ram Bending. The ram-type bending is one of the oldest tube bending methods known in the industry today.
• Roll Bending.
• Compression Bending.
• Rotary Draw Bending.
• Mandrel Bending.

How do you set up a bending machine?

How to Use a Bending Machine

1. Clamp the bending machine to a flat work surface so that it is upright and secure.
2. Rotate the upper, short handle to a position above the bender.
3. Open the latch to make way for insertion of the tube.
4. Close the latch around the tube to hold it in place.

What is bending moment example?

If one end of the ruler is lying on the desk and is being held down, and then a force is applied to the other end of the ruler, it will cause the ruler to bend. The ruler will experience the greatest bending moment at the end where the force is applied.

How do you play joggle?

Joggle is a two-player or two-team game where the aim is to get 6 of your marbles in a rectangle shape on the board. In order to play you set up the game as shown in the picture above. Each player takes it in turns to roll the die; they then place one of their marbles down corresponding to the colour rolled on the die.

How does a bending machine work?

A bending machine is a forming machine tool (DIN 8586). Its purpose is to assemble a bend on a workpiece. A bend is manufactured by using a bending tool during a linear or rotating move. The detailed classification can be done with the help of the kinematics.