What kind of ink does Brother MFC-J470DW use?

What kind of ink does Brother MFC-J470DW use?

Brother MFC-J470DW printers are compatible with standard yield LC101 and high yield LC103 ink cartridges. Our customers prefer LC103 ink cartridges due to their higher capacity and better overall value. Pick up a single cartridge, 4 pack or try our 9 pack!

What ink is compatible with MFC-J497DW?

Compatible Ink for Brother MFC-J497DW The Brother MFC-J497DW uses Brother LC103BK (Black), LC103C (Cyan), LC103M (Magenta), and LC103Y (Yellow). Inkjets.com offers replacement versions of the LC103 with exceptional ink quality, high page yield, and low prices.

Is Brother MFC-J470DW inkjet?

The Brother MFC-J470DW Printer delivers fast, reliable printing at rates up to 33 ppm in black and 27 ppm in color. And since it uses an inkjet system with individual cartridges, you can change out only the ink you need when it’s time for a refill.

How do I reset my brother ink cartridge?

Open the front cover of the printer and press the CLEAR / BACK button. Press the following buttons on the keypad in this sequence, *, 0 and finally 0. Close the front cover. The warning message should now be clear.

How do I connect my Brother MFC j470dw?

Android™

  1. Tap the Settings icon.
  2. Tap Wi-Fi.
  3. If your Wi-Fi is turned Off, turn it On.
  4. Find the SSID you wrote down earlier, and then tap it.
  5. Enter the network key (password) you wrote down earlier, and then tap CONNECT.
  6. The wireless connection setup is complete if Connected appears under the SSID name selected earlier.

How do I scan with my Brother MFC j470dw?

STEP B: Use the Scan to File feature from the SCAN key on my Brother machine

  1. Load your document.
  2. Press SCAN.
  3. Press the UP OR DOWN ARROW key to select Scan to File.
  4. Press OK.
  5. (For network users)
  6. Do one of the following:
  7. Press the UP OR DOWN ARROW key to select Set with Panel, and then press OK.

How do I check ink levels on my Brother MFC j491dw printer?

1. Check the ink status from the control panel

  1. Press. (Settings).
  2. Press the Up or Down arrow key to display General Setup.
  3. Press General Setup.
  4. Press Ink. If.
  5. Press the Up or Down arrow key to display Ink Volume.
  6. Press Ink Volume. The Touchscreen shows the ink volume.
  7. Press .

How do I reset my Brother MFC j470dw printer?

Reset the network settings to the factory default.

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
  2. Press Menu.
  3. Press the Up or Down arrow key to choose Network and press OK.
  4. Press the Up or Down arrow key to choose Network Reset and press OK.