What kind of transmission is in a 1999 Suburban?
What kind of transmission is in a 1999 Suburban?
Product Description. This is a Chevrolet Suburban 1998-1999 Rebuilt Transmission 4L60E. The transmission has a 5-year unlimited mileage warranty. There is NO core charge.
How much does it cost to replace a transmission on a suburban?
The average price range for transmission replacement is between $1,800 and $3,400 for a brand-new component. The additional cost of labor is often between $500 and $1,200, and you should also take taxes and associated fees into account. Learn more about your car’s transmission with our service center, below!
What year Suburban has transmission problems?
We recommend avoiding the following Chevrolet Suburban year models. The 2007 year model is the worst you can buy, as it has the highest number of complaints and they’re the most expensive, like transmission failure costing almost $3,000 and engine failure costing nearly $6,000.
How much horsepower does a 1999 GMC Suburban have?
195 to 290 hp1999 GMC Suburban / Horsepower
Did GMC make a Suburban in 1999?
The Used 1999 GMC Suburban comes with rear wheel drive, and four wheel drive. Available transmissions include: 4-speed automatic.
Is it cheaper to rebuild or replace a transmission?
A transmission replace is the most expensive option when fixing your transmission. In many cases you will hear this referred to as “re-manufactured.” Basically, the manufacturer will replace parts that have gone bad with modified parts. This is an option if the transmission is too damaged to even consider a rebuild.
Is transmission worth replacing?
Rebuilding a transmission can save you a lot of money over the short-term, while keeping car payments out of your monthly budget. For many, rebuilding their transmission is worth the initial cost. Rebuilding a transmission may cost you twenty-five hundred dollars or more, which is a significant chunk of change.
What transmission can replace a 4L60E?
4L80E four-speed automatic transmission
However, if you use your truck hard, it can be a weak point that can fail-in some cases, repeatedly. The owner of this rig could’ve kept paying to have the 4L60E rebuilt, but instead chose to replace it with the much beefier 4L80E four-speed automatic transmission.
What year 4L60E will interchange?
4L60Es had so many variations in trucks. 1993/1994 transmissions are interchangeable. 1995 is a one off year. No other year will interchange DIRECTLY (more on that later) due to the design of the valve body and PWM TCC valve.
Why does Suburban transmission slip?
The number one cause of all transmission problems, from slipping to abnormal sounds, is low transmission fluid. If the fluid is low, a number of problems can crop up that will make the transmission slip, including overheating.
How long does a Suburban transmission last?
The transmission on the Chevy Suburban is built to last between 130,000 to 220,000 miles without ever needing replacement, so long as a proper servicing schedule is followed. Ensure fluid levels are topped up and fix any problems immediately to keep the transmission running smoothly.
Does a 1999 Suburban have an LS engine?
42.0 gal. 330 lb-ft….LS 4dr 4×4. 1999 Chevrolet Suburban 1500 Specs.
|Body width||76.7 “|
|Body height||71.3 “|
What engine is in a 99 Suburban?
5.7 L V8
6.5 L V8 diesel7.4 L V8
1999 Chevrolet Suburban/Engine
How much horsepower does a 1999 Chevy Suburban have?
195 to 290 hp1999 Chevrolet Suburban / Horsepower
How much does a junkyard transmission cost?
How Much Does a Used Transmission Cost?
|Repair Type||Cost Range|
|Replacement Labor (R+R)||$500 to $1200|
|– Used / Salvage Yard||$800 to $1500|
|– Rebuilt / Local Rebuild||$1100 to $2800|
|– Remanufactured||$1300 to $3400|
Can I replace my transmission myself?
When faced with a transmission rebuild or replacement, you can reduce the cost quite significantly by removing and replacing (R&R) the transmission yourself. Depending on the year, make and model of your vehicle and the shop labor costs in your area, you can expect to save between $550 to $1,250 or more.
Is it cheaper to rebuild a transmission or replace it?
How many hours does it take to replace a transmission?
Transmission Replacement Labor Cost A big portion of any transmission replacement or rebuild is the labor cost. It’s at least six hours to remove and install a transmission, often twice that.
Can I put a 4L80E in place of a 4L60E?
Or, as you will see here, you can jump up a level, installing the much more robust and heavy duty GM 4L80E in place, which will bolt a much better stock unit between your engine and rear end, one which can handle much more horsepower and torque than a 4L60E, even in stock form.
What years are interchangeable for 4L60E?
Can you run a 4L60E without a computer?
Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On “E” transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.
Can slipping transmission Be Fixed?
How to Prevent Transmission Slips. If your transmission problem isn’t due to worn out bands or fluid leaks, then you either need to replace the clutch, the worn out gears, the solenoids or the torque converter. Any of these is a costly repair which is best performed by a mechanic with little you can do about it.
Do Suburbans have transmission issues?
Chevrolet Suburban vehicles are unlikely to be an exception. Common transmission problems found in these vehicles include buffering noises, shaking, shuddering, jerking, vehicle vibration, shifting problems and transmission failure. In some cases, shifting problems may lead to rollaway vehicles.
What is considered high mileage for a Suburban?
High mileage Suburbans can be pretty reliable. While Chevy Suburbans usually last around 200,000 miles, they can last over 300,000 with good care.