What size is a bathtub drain stopper?

What Is The Standard Bathroom Drain Size? With a bathtub, the drain will be 1.5 inches in diameter. The drains for sinks can vary slightly, but the most common measurement for those is 1.25 inches. You might also find sinks with a drain diameter of 1.625 inches.

Is there a universal tub stopper?

This Danco Rubber Tub Stopper will keep your bath water from flowing down the drain. It features a split-type ring with beaded chain and is easy to install in any 1-1/2 in. to 2 in. drain.

Are all bathtub drain holes the same size?

Bathtub drains are 1 1/2 inches wide and fit all standard bathtubs ranging from 14 to 26 inches deep. They are this size because they must fit the opening of the P-trap — also 1 1/2 inches wide — which is a special pipe that has a sharp bend in it.

How do I know what size bath plug I need?

To determine the right size of plug, you need to measure the diameter of the drain mesh or the underside of your current plug. Then you’ll be able to shop for the style of sink plug you want and be able to choose the right size the first time.

How do you measure a bath plug?

How do I remove a lift and turn drain plug?

Lift and Turn Tub Stopper With the stopper in the open position, use one hand to hold the body of the stopper in place. Slowing turn the knob counter-clockwise, looking for a screw set on the knob. If there isn’t one, turn the stopper counter-clockwise to unthread from the strainer until it can be removed.

Are plugs a standard size?

Standard bathroom basin plugs measure about 1-1/2 inch (38.1mm) diameter, which suits the hole in a 1-1/4 inch BSP waste. If your original plug is a pop up type, be careful with the replacement as pop up plugs are often a non-standard size.

Are bath plugs standard size?

Standard bath plugs measure about 1-3/4 inch (44.5mm) diameter and suit the hole in a 1-1/2 inch BSP waste. If your original bath plug is a pop-up type, be careful with the replacement as pop-up plugs are often a non standard size.