Where is the disc located in the clutch assembly?
Where is the disc located in the clutch assembly?
The clutch disc is located between the flywheel and pressure plate.
Where is the friction disc been splined?
The Driven Friction Disc is connected to the transmission input shaft via a spline. The disc drives the input shaft in the transmission which translates movement at the wheels.
What does the clutch friction disc always rotate with?
Clutch Disc The disc itself rests between the flywheel and the pressure plate, both of which rotate with the engine. So the clutch disc is spinning with the transmission, and on either side of it is a metal surface which rotates with the engine.
What does T M side mean on a clutch?
T/M SIDE Gearbox Side. TRANS SIDE Gearbox Side. Example: If GEARBOX SIDE appears on the clutch disc, this side will be facing the gearbox if the installation direction is correct. If there is no label present, the installation direction of the used clutch disc must be noted.
Does the clutch touch the flywheel?
To engage the clutch, the clutch pedal is released and the release bearing moves away from the pressure plate. This action allows the pressure plate’s springs to force against the clutch disc, engaging the clutch to the flywheel.
What way does a pressure plate go?
Which way does a clutch plate go in? Always place the flat side of the clutch plate against the motor.
What cools the clutch disc?
The friction forces that exist on the respective friction surfaces of the clutch disk are unevenly distributed. The clutch is cooled by a flow of cooling air that is led through the clutch bell that encloses the clutch and that defines a housing.
Why is clutch plate mounted on splines?
The clutch plate is mounted on the splined shaft and can move along the axis of the shaft. There is no relative movement between plate and shaft as far as rotational movement is concerned. Both have the same rotational movement due to splines provided on the shaft.
Does the clutch spin with the flywheel?
With the clutch pedal at rest, the pressure plate pushes the disc against the flywheel, allowing the assembly to spin as a unit, thus transmitting torque from the crankshaft to the transmission’s input shaft.
What happens if you overheat your clutch?
If you happen to notice your car emitting a burning smell, similar to burning rubber, then this is a sign that your clutch is overheating and your clutch plate is beginning to wear and tear. This is usually caused by riding the clutch and is most common in slow-moving traffic.