# Which lead on LED is cathode?

## Which lead on LED is cathode?

negative side
LED polarity For an LED to work it needs to be connected to a voltage source with the correct side. The voltage supply side of the diode is the positive (+) side, this is called the anode. The negative side is called the cathode.

## Does LED have anode and cathode?

The two leads on a diode are known as the Anode and Cathode. The Anode of the LED is the positive lead, and the cathode is the negative lead. On standard through-hole LEDs, the body will have a flattened edge on one side, the lead on this side is the cathode and is usually also the shorter lead.

Which lead is the anode on an LED?

The anode (longer lead) is the positive lead and the cathode (shorter lead) is the negative lead.

### Which is positive cathode or anode in LED?

ANODE (+)
LEDs are diodes and diodes can only allow electrical current to flow in one direction, therefore LEDs are polarised. The positive pin is the ANODE (+) and the negative pin is the CATHODE (-).

### How do you identify the anode and cathode on an LED?

If the LED has two leads with leads that are equal in length, you can look at the metal plate inside the LED. The smaller plate indicates the positive (anode) lead; the larger plate belongs to the negative (cathode) lead.

What are the two leads of an LED called?

The positive side of the LED is called the “anode” and is marked by having a longer “lead,” or leg. The other, negative side of the LED is called the “cathode.” Current flows from the anode to the cathode and never the opposite direction.

## Does it matter which way the LED is inserted?

1) Polarity Matters And when there’s no current-flow, there’s no light. Luckily, this also means that you can’t break an LED by plugging it in backwards. Rather, it just won’t work. The positive side of the LED is called the “anode” and is marked by having a longer “lead,” or leg.

How do you identify anode and cathode LED?

### How many leads does an LED have?

Answer. Note the different lengths of the three leads. The centre lead (k) is the common cathode for both LEDs, the outer leads (a1 and a2) are the anodes to the LEDs allowing each one to be lit separately, or both together to give the third colour.”

### How do you tell the positive and negative terminal of an LED?

You can try to find the longer leg, which should indicate the positive, anode pin. Or, if someone’s trimmed the legs, try finding the flat edge on the LED’s outer casing. The pin nearest the flat edge will be the negative, cathode pin.