How do you create a control plan?

What are the steps in setting up a Process Control Plan?

1. Set up a multi-functional group.
2. Review and confirm the flow chart.
3. Review and confirm special characteristics.
4. Review and confirm the control method.
5. Review the sampling method.
6. Verify the effectiveness of the measurement system.
7. Confirm the person in charge.

What comes first control plan or FMEA?

A control plan is an end output of the FMEA process. It’s a written document that contains critical information on how you intend to control, or avoid, the identified risks from the FMEA, starting with those that have the highest priority (as identified by their RPN).

What is a control plan example?

Control plans typically monitor product and process characteristics. For example, when manufacturing a disposable coffee cup, a product characteristic might be the overall height of the cup, and a process characteristic might be the curing temperature for the adhesive joining the top to the bottom of the cup.

What goes into a control plan template?

Elements of a control plan

• Prototype, Pre-Launch, or Production.
• Control Plan Number.
• Part Number/Latest Change Level.
• Part Name/Description.
• Supplier/Plant.
• Supplier Code.
• Key Contact/Phone.
• Core Team.

What is difference between control plan and FMEA?

What are components of a control plan?

Seven attributes to consider when creating a control plan are:

• 1.1 Measurements and Specifications.
• 1.2 Input/Output to a Process.
• 1.3 Processes Involved.
• 1.4 Frequency of Reporting and Sampling Methodology.
• 1.5 Recording of Information.
• 1.6 Corrective Actions.
• 1.7 The Process Owner.
• 1.8 Summary.

What is a good control plan?

In sum: a good control plan clearly describes what actions to take, when to take them, and who should take them. It provides a clearly documented approach to be followed in case of variations, thereby precluding the firefighting syndrome setting in.

What is control plan and Pfmea?

Control Plans assure a system is in place to control the risks of the same failure modes as identified in the PFMEA. While Control Plans can be developed independently of PFMEAs, it is time and cost-effective to link Control Plans directly to PFMEAs.

What is the difference between FMEA and Control plan?

Who is the author of control plan AIAG?

Title Control Plan AIAG Author Jay Arthur Description If you would like the latest version of Last modified by Johnson, Angelique Created Date 3/19/2000 8:22:52 PM

What is the AIAG APQP manual?

Keep AIAG’s APQP manual on hand as a reference guideline. The manual covers the majority of situations that occur in early planning, design, or process analysis phases.

What information should be included in a control plan?

Name and telephone number of the key contact Date of the latest control plan updates. All the steps in the manufacturing process that are relevant to the control of the product quality. Processing equipment as precisely as possible, e.g., machine, device, jig, machine make, machine model number, asset #, etc.

What is included in the revision level of the control plan?

Revision level Part name Name and telephone number of the key contact Date of the latest control plan updates. All the steps in the manufacturing process that are relevant to the control of the product quality. Processing equipment as precisely as possible, e.g., machine, device, jig, machine make, machine model number, asset #, etc.