How do you set Dehumidistat ventilation?

Press and release the Dehumidistat button until the Dehumidistat Light is at the desired setting. After a few seconds the Dehumidistat light will either flash or be on continuous. A flashing light indicates the humidity level is higher than the setting and the unit is operating on high speed ventilation.

Should I leave my HRV on all the time?

To ensure that you home is well-ventilated and maintains good air quality, your HRV and ERV should run continuously. Many HRV fans can operate at low, medium, or high speeds depending on the ventilation requirements.

How do you set a healthy climate HRV ventilation system?

As a general rule of thumb, you should set your system’s dehumidistat to 25 percent to 50 percent depending on the temperature to keep condensation at bay. For instance, 50 percent is the maximum relative humidity you should have if the outdoor temperature is between -11 degrees Celsius to 18 degrees Celsius.

What should I set my Dehumidistat to?

You can set dehumidistats to a humidity level that’s within the optimal humidity range for your health and comfort (between 40 and 65%).

What setting should my air exchanger be on in the summer?

If possible, you should adjust the settings to switch to “recirculation” mode during the warm season. This effectively limits the entrance of moisture and lets the air circulate throughout the house.

How do you use Dehumidistat?

Dehumidistats are great to use because they are a way to save money, save energy, and protect your home from the damages of excess humidity. When you are home, simply set your dehumidistat to “on” and set the temperature on the thermostat according to your comfort.

How do you use dehumidistat?

What should your humidifier be set at in the winter?

Humidity plays an essential role in the air quality inside your home. So, you need to adjust it accordingly to ensure there aren’t any damages to you or your home. In the summers, you might need to turn the furnace humidifiers off. For winters, it’s best to set it at 35-45% for a comfortable home.

What humidity should I set my air exchanger at?

Outdoor temperature between -20°C and -10°C: approximate humidity level of 35% Outdoor temperature between -30°C and -20°C: approximate humidity level of 30%

How does a dehumidistat work with a furnace?

Whenever the home becomes more humid than it should be, the dehumidistat communicates with the thermostat to turn on the air conditioner to try and kick out all of the unnecessary humidity. Without a dehumidistat, if the air conditioner is turned off, mold is likely to occur from the excess humidity.

Should you turn off your HRV in the summer?

There are different schools of thought on this subject, but as a general rule of thumb, it’s best to only turn your HRV system off completely during the summer if you have your windows open.

How does HRV ventilation system work?

How does an HRV work? An HRV is a very energy efficient system that pulls the stale air from inside your home while simultaneously replacing it with fresh air from outside your home. An HRV works by drawing in the stale, warm air from inside your home along with the cooler, fresh air from outside your home.

When should I turn off my HRV?

In a nutshell, you should shut off the HRV humidistatic control as soon as the furnace is not being used on the heat setting. You’ve noted that you open the windows in the shoulder seasons, which will passively add significant fresh air and naturally dry the warm air inside the cottage.

How does a Dehumidistat work?

A dehumidistat works almost like a humidistat but instead of closing, its electrical contacts open up when the room’s humidity level is lower than the controller’s setting. When the room’s humidity increases, the electrical contacts close .